

- LM4041AIZ-1.2/NOPB - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- BQ296217DSGT - 集成电路(IC) > 电源管理(PMIC) > 电池管理
- OPA337UAG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS54620RHLT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- ISOTMP35BDFQR - 传感器,变送器 > 温度传感器 > 模拟和数字输出
- TL026CPG4 - 集成电路(IC) > 线性 > 放大器 > 视频放大器和模块
- CD74ACT651M96 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LMS202IMX - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- TPS566231PRQFR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- ADC10040QCIMT - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- SN74LS253N - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- TLC5929DBQ - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- TMS320VC5510AGGW1 - 集成电路(IC) > 嵌入式 > DSP(数字信号处理器)
- TPS62660EVM-419 - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- TPS62175EVM-098 - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- UCC27712QDQ1 - 集成电路(IC) > 电源管理(PMIC) > 栅极驱动器
- SN74ALS623AN - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- SN75188NSR - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- TAS5802PWPR - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- ADS7817E/250 - 集成电路(IC) > 数据采集 > 模数转换器(ADC)



UCC2808A-1Q1 - 汽车类低功率电流模式推拉 PWM
UCC2808A-1Q1是TI德州仪器公司的一款PWM与谐振控制器产品,UCC2808A-1Q1是汽车类低功率电流模式推拉 PWM,本站介绍了UCC2808A-1Q1的封装应用图解、特点和优点、功能等,并给出了与UCC2808A-1Q1相关的TI元器件型号供参考。
UCC2808A-1Q1 - 汽车类低功率电流模式推拉 PWM - PWM与谐振控制器 - 离线隔离型DC/DC控制器和转换器 - 德州仪器
The UCC2808A-xQ1 is a family of BiCMOS push-pull, high-speed, low-power, pulse-width modulators. The UCC2808A-xQ1 contains all of the control and drive circuitry required for off-line or DC-to-DC fixed frequency current-mode switching power supplies with minimal external parts count.
The UCC2808A-xQ1 dual output drive stages are arranged in a push-pull configuration. Both outputs switch at half the oscillator frequency using a toggle flip-flop. The dead time between the two outputs is typically 60 ns to 200 ns depending on the values of the timing capacitor and resistors, thus limiting each output stage duty cycle to less than 50%.
The UCC2808A-xQ1 family offers a variety of package options and choice of undervoltage lockout levels. The family has UVLO thresholds and hysteresis options for off-line and battery powered systems. Thresholds are shown in the ordering information table.
The UCC2808A-xQ1 is an enhanced version of the UCC2808 family. The significant difference is that the A versions feature an internal discharge transistor from the CS pin to ground, which is activated each clock cycle during the oscillator dead time. The feature discharges any filter capacitance on the CS pin during each cycle and helps minimize filter capacitor values and current sense delay.
- Qualified for Automotive Applications
- ESD Protection Exceeds 1500 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
- Dual Output Drive Stages in Push-Pull Configuration
- Current Sense Discharge Transistor to Improve Dynamic Response
- 130-µA Typical Starting Current
- 1-mA Typical Run Current
- Operation to 1 MHz
- Internal Soft Start
- On-Chip Error Amplifier With 2-MHz Gain Bandwidth Product
- On Chip VDD Clamping
- Output Drive Stages Capable of 500-mA Peak-Source Current, 1-A Peak-Sink Current
- TPS40009 - 低输入 (2.25V-5.5V) 600 kHz 频率同步降压控制器,具有输出驱动/吸入和预偏置操作
- SN54S10 - 三路 3 输入正与非门
- HD3SS6126 - USB 3.0 差动开关 2:1/1:2 MUX/DEMUX
- SRC4392 - 2 通道采样率转换器,具有数字音频接口接收器和发送器
- DCR010505 - 微型 1W 隔离稳压 DC/DC 转换器
- LMK04808 - 具有双环 PLL 的 LMK04800 系列低噪声时钟抖动消除器
- LM285-ADJ - 可调节微功耗电压基准
- UC2577-ADJ - 简单步增稳压器
- SMJ320C6415 - 定点数字信号处理器
- DAC8718 - 八路、低功耗、16 位 +/16.5V 输出串行输入数模转换器



