

- SN74LVC162244ADGVR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- DRV8814PWPR - 集成电路(IC) > 电源管理(PMIC) > 电机驱动器,控制器
- MAX3243CDBRG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LM2598SX-3.3/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- SN74LV32ADBRE4 - 集成电路(IC) > 逻辑 > 门和反相器
- LP873347RHDT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性 + 开关
- DS92LV040ATLQAX/NOPB - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- OPT3004EVM - 开发板,套件,编程器 > 评估板 > 传感器评估板
- TLC2252AQDR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74ALS638A-1DWG4 - 逻辑 - 缓冲器,驱动器,接收器,收发器
- SN74LVC1G08DPKR - 集成电路(IC) > 逻辑 > 门和反相器
- TPS78223DDCT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- 74ACT16541DL - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- DCP010505BP-UE4 - 板安装电源 > 直流转换器
- OPT3004DNPR - 传感器,变送器 > 光学传感器 > 环境光、IR 红外线、UV 紫外线传感器
- LP38500SDE-ADJ/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN74ACT1073DW - 集成电路(IC) > 逻辑 > 专用逻辑器件
- ULN2003AIPWR - 分立半导体产品 > 晶体管 > 双极(BJT) > 双极晶体管阵列
- BQ24257YFFR - 集成电路(IC) > 电源管理(PMIC) > 电池充电器
- SN75115N - 集成电路(IC) > 接口 > 驱动器,接收器,收发器



UCC28810 - LED 照明电源控制器
UCC28810是TI德州仪器公司的一款LED照明-照明产品,UCC28810是LED 照明电源控制器,本站介绍了UCC28810的封装应用图解、特点和优点、功能等,并给出了与UCC28810相关的TI元器件型号供参考。
UCC28810 - LED 照明电源控制器 - LED照明-照明 - LED驱动器 - 德州仪器
The UCC28810 and UCC28811 are general lighting power controllers for low to medium power lumens applications requiring power factor correction and EMC compliance. It is designed for controlling a flyback, buck or boost converter operating in critical conduction mode. It features a transconductance voltage amplifier for feedback error processing, a simple current reference generator for generating a current command proportional to the input voltage, a current-sense (PWM) comparator, PWM logic and a totem-pole driver for driving an external FET.
In the critical conduction mode operation, the PWM circuit is self-oscillating with the turn-on being governed by a transformer zero energy detector (TZE pin) and the turn-off being governed by the current sense comparator. Additionally, the controller provides features such as peak current limit, restart timer, overvoltage protection (OVP), and enable.
The efficient system performance is attained by incorporation of zero power detect function which allows the controller output to shut down at light load conditions without running into overvoltage. The device also features an innovative slew rate enhancement circuit which improves the large signal transient performance of the voltage error amplifier. The low start-up and operating currents of the device result in low power consumption and ease of start-up. The highly-accurate internal bandgap reference leads to tight regulation of the output voltage in normal and OVP conditions, resulting in higher system reliability. The enable comparator ensures that the controller is off if the feedback sense path is broken or if the input voltage is very low.
There are two key parametric differences between UCC28810 and UCC28811, the UVLO turn-on threshold and the gM amplifier source current. The UVLO turn-on threshold of the UCC28810 is 15.8 V and for the UCC28811 it is 12.5 V. The gM amplifier source current for UCC28810 is typically 1.3 mA, and for the UCC28811 it is 300µA. The higher UVLO turn-on threshold of the UCC28810 allows quicker and easier start-up with a smaller VDD capacitance while the lower UVLO turn-on threshold of UCC28811 allows operation of the critical conduction mode controller to be easily controlled by the downstream PWM controller in two-stage power converters. The UCC28810 gM amplifier also provides a full 1.3-mA typical source current for faster start-up and improved transient response when the output is low either at start-up or during transient conditions. The UCC28811 is suitable for applications such as street lights and larger area luminaires where a two-stage power conversion is needed. The UCC28810 is suitable for applications such as commercial or residential retrofit luminaires where there is no down-stream PWM conversion and the advantages of smaller VDD capacitor and improved transient response can be realized.
Devices are available in the industrial temperature range of 40°C to 105°C. Package offering is an 8-pin SOIC (D) package.
- Transition Mode Controller for Low Implementation Cost of AC Input LED Lighting Applications
- Implements Single Stage Power Factor Corrected LED Driver
- Enhanced Transient Response With Slew-Rate Comparator
- Interfaces with Traditional Wall Dimmers
- Accurate Internal VREF for Tight Output Regulation
- Two UVLO Options
- Overvoltage Protection (OVP), Open-Feedback Protection and Enable Circuits
- ±750-mA Peak Gate Drive Current
- Low Start-Up and Operating Currents
- Lead (Pb)-Free Packages
- APPLICATIONS
- AC Input General Lighting Applications Using HB LEDs
- Industrial, Commercial and Residential Lighting Fixtures
- Outdoor Lighting: Street, Roadway, Parking, Construction and Ornamental LED Lighting Fixtures
All trademarks are the property of their respective owners.
- TPS62172-Q1 - 采用 2x2 QFN 封装的 3-17V 0.5A 汽车类降压转换器
- ADS1274 - 四路、128kHz、24 位同步采样 Σ-Δ ADC
- BQ24108 - 采用 QFN 封装且具有 2A FET 的独立 bqSWITCHER(TM) 异步开关模式锂离子充电器
- TXS0206-29 - 具有 ESD 保护、EMI 滤波和 2.9V LDO 的 MMC、SD 卡、MemoryStick 电压转换
- TIBPAL16R4-15M - 高性能 Impact PAL 电路
- TPS61161-Q1 - 采用 2mm x 2mm QFN 封装的具有数字和 PWM 亮度控制的汽车类白光 LED 驱动器
- SN74CBTR16861 - 20 位 FET 总线开关
- TPS51678 - 用于 VR12.6 V.CPU 的 2 相、D-CAP+TM 降压控制器
- LSF0204D - 适用于漏极开路和推挽应用的 4 位双向多电压电平转换器
- DAC8718 - 八路、低功耗、16 位 +/16.5V 输出串行输入数模转换器



