


- TLV70530YFMR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN74LS297N - 集成电路(IC) > 逻辑 > 专用逻辑器件
- AMC1302QDWVQ1 - 集成电路(IC) > 线性 > 放大器 > 特殊用途放大器
- ADS8350IRTET - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- CD40175BM96 - 集成电路(IC) > 逻辑 > 触发器
- SN74ABT7819A-12PH - 逻辑 - FIFO 存储器
- TL064CNSR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LP3923TLX/NOPB - 集成电路(IC) > 电源管理(PMIC) > 电源管理 - 专用
- TPS7325QDR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LM5068EVAL - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- TIB82S105BCFN - 集成电路(IC) > 嵌入式 > PLD(可编程逻辑器件)
- SN75LVPE3101RGET - 集成电路(IC) > 接口 > 信号缓冲器、中继器、分离器
- TPS92310DGS/NOPB - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- CD74HCT670MTG4 - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- CD74HC194E - 集成电路(IC) > 逻辑 > 移位寄存器
- LMR36520AEVM - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- SN761643DGKR - 线性 - 视频处理
- TLC1543IDW - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- SN74ALVCH16823DL - 集成电路(IC) > 逻辑 > 触发器
- TLC1079IN - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器



ADC128S102QML-SP - 8-Channel, 50 kSPS to 1 MSPS, 12-Bit A/D Converter
ADC128S102QML-SP是TI德州仪器公司的一款精密ADC(<=10MSPS)产品,ADC128S102QML-SP是8-Channel, 50 kSPS to 1 MSPS, 12-Bit A/D Converter,本站介绍了ADC128S102QML-SP的封装应用图解、特点和优点、功能等,并给出了与ADC128S102QML-SP相关的TI元器件型号供参考。
ADC128S102QML-SP - 8-Channel, 50 kSPS to 1 MSPS, 12-Bit A/D Converter - 精密ADC(<=10MSPS) - 模数转换器 - 德州仪器
- Total Ionizing Dose 100 krad(Si)
- Single Event Latch-Up 120 MeV-cm2/mg
- Eight Input Channels
- Variable Power Management
- Independent Analog and Digital Supplies
- SPI™/QSPI™/MICROWIRE™/DSP Compatible
- Packaged in 16-Lead Ceramic SOIC
- Key Specifications
- Conversion Rate: 50 kSPS to 1 MSPS
- DNL (VA = VD = 5 V): +1.5 / −0.9 LSB (Maximum)
- INL (VA = VD = 5 V): +1.4 / −1.25 LSB (Maximum)
- Power Consumption
- 3-V Supply: 2.3 mW (Typical)
- 5-V Supply: 10.7 mW (Typical)
- Automotive Navigation
- Portable Systems
- Medical Instruments
- Mobile Communications
- Instrumentation and Control Systems
The ADC128S102 device is a low-power, eight-channel CMOS 12-bit analog-to-digital converter specified for conversion throughput rates of 50 kSPS to 1 MSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. The device can be configured to accept up to eight input signals at inputs IN0 through IN7.
The output serial data is straight binary and is compatible with several standards, such as SPI, QSPI, MICROWIRE, and many common DSP serial interfaces.
The ADC128S102 may be operated with independent analog and digital supplies. The analog supply (VA) can range from 2.7 V to 5.25 V, and the digital supply (VD) can range from 2.7 V to VA. Normal power consumption using a 3-V or 5-V supply is 2.3 mW and 10.7 mW, respectively. The power-down feature reduces the power consumption to 0.06 µW using a 3-V supply and 0.25 µW using a 5-V supply.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| ADC128S102QML-SP | CFP (16) | 9.91 mm × 6.35 mm |
- ADS54J40 - ADS54J40 双通道 14 位 1.0GSPS 数模转换器
- TPS2075 - 用于总线/自供电 USB 集线器的电源控制器,具有 3.3V LDO、8 个电源开关以及工作态高电平 BP 模式指示信号
- SN74HC165 - 8 位并联负载移位寄存器
- TPS65233 - 具有 I2C 接口的 LNB 稳压器
- LM2673 - 具有可调节电流限制的 3A 降压电压稳压器
- ADS62P25 - 具有可选 DDR LVDS 或 CMOS 输出的双路 12 位 125MSPS ADC
- SN74LV165A - 并联负载 8 位移位寄存器
- ADS8664 - 12 位、4 通道、软件可编程输入范围、250kSPS、ADC
- TMS320R2811 - 具有 RAM 的 32 位数字信号控制器
- CSD17571Q2 - 30V N 通道 NexFET 功率 MOSFET,CSD175712Q



