

- ADS7865IPBS - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- SN74ALVTH16244DL - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- CD4081BMG4 - 集成电路(IC) > 逻辑 > 门和反相器
- DRV8245SQPWPRQ1 - 集成电路(IC) > 电源管理(PMIC) > 电机驱动器,控制器
- UC1845AMDREP - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- SN65HVD72DGK - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- SN74AHC157PWRG4 - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- SM72485MM/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LM4917SD/NOPB - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- TPIC6B596DW - 集成电路(IC) > 逻辑 > 移位寄存器
- UCC38050DR - 集成电路(IC) > 电源管理(PMIC) > PFC(功率因数校正)
- TPS2505B1RGWR - 集成电路(IC) > 电源管理(PMIC) > 配电开关,负载驱动器
- LP2985AIM5X-4.0 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DAC7641YB/2KG4 - 数据采集 - 数模转换器(DAC)
- TLC27M2ACDR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TL431IP - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- TLV7034RTER - 集成电路(IC) > 线性 > 比较器
- SN74LVC2G32QDCURQ1 - 集成电路(IC) > 逻辑 > 门和反相器
- UCC28056EVM-296 - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- TPS6503201CCRGERQ1 - 集成电路(IC) > 电源管理(PMIC) > 电源管理 - 专用



ADCS7477 - 采用 SOT-23 和 LLP 封装的 1MSPS、12-/10-/8 位 A/D 转换器
ADCS7477是TI德州仪器公司的一款精密ADC(<=10MSPS)产品,ADCS7477是采用 SOT-23 和 LLP 封装的 1MSPS、12-/10-/8 位 A/D 转换器,本站介绍了ADCS7477的封装应用图解、特点和优点、功能等,并给出了与ADCS7477相关的TI元器件型号供参考。
ADCS7477 - 采用 SOT-23 和 LLP 封装的 1MSPS、12-/10-/8 位 A/D 转换器 - 精密ADC(<=10MSPS) - 模数转换器 - 德州仪器
The ADCS7476, ADCS7477, and ADCS7478 are low power, monolithic CMOS 12-, 10- and 8-bit analog-to-digital converters that operate at 1 MSPS. The ADCS7476/77/78 are drop-in replacements for Analog Devices' AD7476/77/78. Each device is based on a successive approximation register architecture with internal track-and-hold. The serial interface is compatible with several standards, such as SPI™, QSPI™, MICROWIRE™, and many common DSP serial interfaces.
The ADCS7476/77/78 uses the supply voltage as a reference, enabling the devices to operate with a full-scale input range of 0 to VDD. The conversion rate is determined from the serial clock (SCLK) speed. These converters offer a shutdown mode, which can be used to trade throughput for power consumption. The ADCS7476/77/78 is operated with a single supply that can range from +2.7V to +5.25V. Normal power consumption during continuous conversion, using a +3V or +5V supply, is 2 mW or 10 mW respectively. The power down feature, which is enabled by a chip select (CS) pin, reduces the power consumption to under 5 µW using a +5V supply. All three converters are available in a 6-lead, SOT-23 package and in a 6-lead WSON, both of which provide an extremely small footprint for applications where space is a critical consideration. These products are designed for operation over the automotive/extended industrial temperature range of −40°C to +125°C.
- Variable Power Management
- Packaged in 6-Lead, SOT-23 and WSON
- Power Supply used as Reference
- Single +2.7V to +5.25V Supply Operation
- SPI™/QSPI™/MICROWIRE™/DSP Compatible
Key Specifications
- Resolution with no Missing Codes 12/10/8 bits
- Conversion Rate 1 MSPS
- DNL +0.5, -0.3 LSB (typ)
- INL ± 0.4 LSB (typ)
- Power Consumption
- 3V Supply 2 mW (typ)
- 5V Supply 10 mW (typ)
- AM26C32 - 四路差动线路接收器
- SN54LVC32A - 四路 2 输入正或门
- TL16C750 - 具有 64 字节 FIFO、自动流控制、低功耗模式的单路 UART
- SN75DP129 - DisplayPort 至 TMDS 转换器
- TPS73633-EP - 具有反向电流保护的增强型产品无电容 Nmos 400Ma 低压降稳压器
- LM5025C - 有源钳位电压模式 PWM 控制器
- CDCLVC1103 - 低抖动 1:3 LVCMOS 扇出时钟缓冲器
- LMT87 - 具有 AB 类输出的 LMT87 - 1.5V、SC70、多增益模拟温度传感器
- TPS54329 - 具有 D-CAP2? 模式的 4.5V 至 18V 输入、3A 同步降压转换器
- BQ24193 - 具有 Narrow VDC 电源路径的 I2C 控制 4.5A 单节 USB/适配器充电器



