

- TLC25M2CPWLE - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPIC8101DWR - 集成电路(IC) > 接口 > 传感器和检测器接口
- LP3984IMF-3.1/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- BQ25570RGRT - 集成电路(IC) > 电源管理(PMIC) > 电源管理 - 专用
- OPA2301AID - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- 430BOOST-TMP006 - 开发板,套件,编程器 > 评估板 > 传感器评估板
- SN74LV574AZQNR - 集成电路(IC) > 逻辑 > 触发器
- LM3431AQMH/NOPB - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- TIOL1123DRCR - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- CLC5623IMX - 集成电路(IC) > 线性 > 放大器 > 视频放大器和模块
- LM4923LQX/NOPB - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- TPS781330220DRVR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LMP90078MH/NOPB - 集成电路(IC) > 数据采集 > 模拟前端(AFE)
- LP3985ITLX-2.5 - 电源管理IC - 稳压器 - 线性
- CDCUN1208LPRHBT - 集成电路(IC) > 时钟/定时 > 时钟缓冲器,驱动器
- TMP107BIDR - 传感器,变送器 > 温度传感器 > 模拟和数字输出
- UC3845ADWTRG4 - 电源管理IC - 稳压器 - DC DC 开关式控制器
- INA180B2IDBVT - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TMP121AQDBVREP - 传感器,变送器 > 温度传感器 > 模拟和数字输出
- TRS232IDWR - 集成电路(IC) > 接口 > 驱动器,接收器,收发器



ADS1196 - 用于 ECG 的低功耗、6 通道、16 位模拟前端
ADS1196是TI德州仪器公司的一款医疗电子模拟前端产品,ADS1196是用于 ECG 的低功耗、6 通道、16 位模拟前端,本站介绍了ADS1196的封装应用图解、特点和优点、功能等,并给出了与ADS1196相关的TI元器件型号供参考。
ADS1196 - 用于 ECG 的低功耗、6 通道、16 位模拟前端 - 医疗电子模拟前端 - 模拟前端(AFE) - 德州仪器
The ADS1194/6/8 are a family of multichannel, simultaneous sampling, 16-bit, delta-sigma (ΔΣ) analog-to-digital converters (ADCs) with a built-in programmable gain amplifier (PGA), internal reference, and an onboard oscillator.
With its high levels of integration and exceptional performance, the ADS1194/6/8 family enables the creation of scalable medical instrumentation systems at significantly reduced size, power, and overall cost.
The ADS1194/6/8 have a flexible input multiplexer per channel that can be independently connected to the internally-generated signals for test, temperature, and lead-off detection. Additionally, any configuration of input channels can be selected for derivation of the right leg drive (RLD) output signal. The ADS1194/6/8 operate at data rates as high as 8kSPS, thereby allowing the implementation of software pace detection. Lead-off detection can be implemented internal to the device, either with a pull-up/pull-down resistor or an excitation current sink/source. Three integrated amplifiers generate the Wilson Center Terminal (WCT) and the Goldberger terminals (GCT) required for a standard 12-lead medical electrocardiogram (ECG).
Multiple ADS1194/6/8 devices can be cascaded in high channel count systems in a daisy-chain configuration.
Package options include a tiny 8mm × 8mm, 64-ball BGA and a TQFP-64. Both packages are specified over the temperature range of 0°C to +70°C.
- Eight Low-Noise PGAs and Eight High-Resolution ADCs (ADS1198)
- Low Power: 0.55mW/channel
- Input-Referred Noise: 12µVPP (150Hz BW, G = 6)
- Input Bias Current: 200pA
- Data Rate: 125SPS to 8kSPS
- CMRR: –105dB
- Programmable Gain: 1, 2, 3, 4, 6, 8, or 12
- Supports AAMI EC11, EC13, IEC60601-1, IEC60601-2-27, and IEC60601-2-51 Standards
- Supplies: Unipolar or Bipolar
- Analog: 2.7V to 5.25V
- Digital: 1.65V to 3.6V
- Built-In Right Leg Drive Amplifier, Lead-Off Detection, WCT, Test Signals
- Pace Detection Channel Select
- Built-In Oscillator and Reference
- Flexible Power-Down, Standby Mode
- SPI™-Compatible Serial Interface
- Operating Temperature Range: 0°C to +70°C
- CD74HC27 - 高速 CMOS 逻辑三路 3 输入或非门
- LM5032 - 高电压双路交错电流模式控制器
- TPS2062C-2 - 双通道限流开关
- SN74LVC139A-Q1 - 汽车类二路 2 线路至 4 线路解码器/多路解复用器
- SN54LS74A - 具有预设和清零功能的双路 D 类上升沿触发器
- OPA1642 - Sound-Plus 高性能、JFET 输入音频运算放大器
- TL1431-SP - 精密可调节(可编程)并联参考
- CDCVF2510A - 具有断电模式的 3.3V 锁相环时钟驱动器
- TPIC6C595 - 8 位移位寄存器
- AM3354 - Sitara ARM Cortex-A8 微处理器



