

- SN74AHCT373DBR - 集成电路(IC) > 逻辑 > 锁存器
- SN74LS165ADR - 集成电路(IC) > 逻辑 > 移位寄存器
- LP3996SD-3030 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TLV2625IN - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TLV70030DSET - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN74LS07DBRG4 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- JD54LS244SSA - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LP5900SDX-3.3/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LM2841YMKX-ADJL/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LM3402HVEVAL - 评估板 - LED 驱动器
- DS16EV5110SQX/NOPB - 集成电路(IC) > 接口 > 专用
- ADS8344EG4 - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- TLV3494AIPWT - 集成电路(IC) > 线性 > 比较器
- LP8755KME/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- DCP011515DBP-UE4 - 板安装电源 > 直流转换器
- LMZM23600V3EVM - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- LM3S5P56-IQR80-C0T - 嵌入式 - 微控制器
- MUX506IPWR - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- MAX207IDWR - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- ADC0804LCWMX/NOPB - 集成电路(IC) > 数据采集 > 模数转换器(ADC)



ADS808 - 12 位 70MSPS ADC,具有单端/差动输入、内部/外部参考、灵活时钟、可选择全范围和断电功能
ADS808是TI德州仪器公司的一款高速ADC(>10MSPS)产品,ADS808是12 位 70MSPS ADC,具有单端/差动输入、内部/外部参考、灵活时钟、可选择全范围和断电功能,本站介绍了ADS808的封装应用图解、特点和优点、功能等,并给出了与ADS808相关的TI元器件型号供参考。
ADS808 - 12 位 70MSPS ADC,具有单端/差动输入、内部/外部参考、灵活时钟、可选择全范围和断电功能 - 高速ADC(>10MSPS) - 模数转换器 - 德州仪器
The ADS808 is a high-dynamic range, 12-bit, 70MHz, pipelined Analog-to-Digital Converter (ADC). It includes a high-bandwidth linear track-and-hold that has a low jitter of only 0.25ps rms, leading to excellent SNR performance. The clock input can accept a low-level differential sine wave or square wave signal down to 0.5Vp-p, further improving the SNR performance. It also accepts a single-ended clock signal and has flexible threshold levels.
The ADS808 has a 2Vp-p differential input range (1Vp-p 2 inputs) for optimum signal-to-noise ratio. The differential operation gives the lowest even-order harmonic components. A lower input voltage of 1.5Vp-p or 1Vp-p can also be selected using the internal references, further optimizing SFDR. Alternatively, a single-ended input range can be used by tying the IN\ input to the common-mode voltage, if desired.
The ADS808 also provides an over-range flag that indicates when the input signal has exceeded the converters full-scale range. This flag can also be used to reduce the gain of the front-end signal conditioning circuitry. It also employs digital error-correction techniques to provide excellent differential linearity for demanding imaging applications. The ADS808 is available in a small TQFP-48 PowerPAD thermally enhanced package.
- DYNAMIC RANGE: SNR: 64dB at 10MHz fIN SFDR: 68dB at 10MHz fIN
- PREMIUM TRACK-AND-HOLD: Low Jitter: 0.25ps rms Differential or Single-Ended Inputs Selectable Full-Scale Input Range
- FLEXIBLE CLOCKING: Differential or Single-Ended Accepts Sine or Square Wave Clocking Down to 0.5Vp-p Variable Threshold Level
- APPLICATIONS
- BASESTATION WIDEBAND RADIOS: CDMA, GSM, TDMA, 3G, AMPS, and NMT
- TEST INSTRUMENTATION
- CCD IMAGING
PowerPAD is a registered trademark of Texas Instruments.
- SM320VC5510A-EP - 增强型产品定点数字信号处理器
- MSP430F2274-EP - 具有 32kB 闪存和 1K RAM 的 16 位超低功耗微控制器
- SN74AVC16334 - 具有三态输出的 16 位通用总线驱动器
- TAS5715 - 具有扬声器均衡、双频带 DRC 和 DC 保护的 25W 立体声 I2S 音频放大器
- UCC2305 - HID 灯控制器
- UC3872 - 谐振灯镇流器控制器
- TPS64203 - 采用 SOT-23 封装静态电流为 20uA 的可调节高达 3A 输出的 95% 效率步降控制器
- SN75437A - 四路外设驱动器
- DAC900-Q1 - 可伸缩电流输出在 2mA 与 20mA 之间的汽车类 10 位 165MSPS SpeedPlus(TM) DAC
- SN65HVD1782 - 具有故障保护功能的 30V RS-485 收发器



