

- LM4890MBD - 开发板,套件,编程器 > 评估板 > 音频放大器评估板
- UCC3803D - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- 4511BDC - 集成电路(IC) > 电源管理(PMIC) > 显示驱动器
- DAC8552IDGKR - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- LMR51625XDDCR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- TPS79433QDCQRQ1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN74ABT240APWLE - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TSC2008TRGVRQ1 - 集成电路(IC) > 数据采集 > 触摸屏控制器
- TPSM82810EVM-089 - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- CD74AC623M96 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- DAC8734SPFB - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- TPS70845PWPG4 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TMS320F28027FPTTR - 集成电路(IC) > 嵌入式 > 微控制器
- SN74S374DWRE4 - 逻辑 - 触发器
- MSP430F47167IPZ - 集成电路(IC) > 嵌入式 > 微控制器
- MSP430F6766IPZR - 集成电路(IC) > 嵌入式 > 微控制器
- TL432BQDBVRE4 - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- OPA4684IDG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LMZ12003TZE-ADJ/NOPB - 板安装电源 > 直流转换器
- TPS51222RTVT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性 + 开关



BQ24018 - 用于便携式应用的单芯片锂离子充电管理 IC (bqTINY)
BQ24018是TI德州仪器公司的一款电池充电器IC产品,BQ24018是用于便携式应用的单芯片锂离子充电管理 IC (bqTINY),本站介绍了BQ24018的封装应用图解、特点和优点、功能等,并给出了与BQ24018相关的TI元器件型号供参考。
BQ24018 - 用于便携式应用的单芯片锂离子充电管理 IC (bqTINY) - 电池充电器IC - 电池管理产品 - 德州仪器
The bqTINY™ series are highly integrated Li-Ion and Li-Pol linear charge management devices targeted at space limited portable applications. The bqTINY™ series offer integrated powerFET and current sensor, reverse blocking protection, high accuracy current and voltage regulation, charge status, and charge termination, in a small package.
The bqTINY™ charges the battery in three phases: conditioning, constant current, and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety feature for charge termination. The bqTINY™ automatically restarts the charge if the battery voltage falls below an internal threshold. The bqTINY™ automatically enters sleep mode when VCC supply is removed.
In addition to the standard features, different versions of the bqTINY™ offer a multitude of additional features. These include temperature sensing input for detecting hot or cold battery packs; power good (PG) output indicating the presence of valid input power; a TTL-level charge-enable input (CE) used to disable or enable the charge process; and a TTL-level timer and termination enable (TTE) input used to disable or enable the fast-charge timer and charge termination.
- Small 3-mm × 3-mm MLP (QFN) Package
- Ideal for Low-Dropout Designs for Single-Cell Li-Ion or Li-Pol Packs in Space Limited Applications
- Integrated Power FET and Current Sensor for Up to 1-A Charge Applications
- Reverse Leakage Protection Prevents Battery Drainage
- Integrated Current and Voltage Regulation
- ±0.5% Voltage Regulation Accuracy
- Charge Termination by Minimum Current and Time
- Pre-Charge Conditioning With Safety Timer
- Status Outputs for LED or System Interface Indicates Charge and Fault Conditions
- Battery Insertion and Removal Detection
- Works With Regulated and Unregulated Supplies
- Short-Circuit Protection
- Charge Voltage Options: 4.2 V and 4.36 V
- DRV104 - 用于螺线管、线圈、阀、加热器和电灯的 PWM 高侧驱动器 (1.5A)
- REF3120 - 采用 SOT23-3 封装最大漂移 20ppm/℃ 静态电流 100μA 的电压参考系列
- SN54LVTH574-SP - 具有三态输出的 3.3V ABT 八路边沿 D 类触发器
- SN74ALVCH16841 - 具有三态输出的 20 位总线接口 D 类锁存器
- ADC081S021 - 单通道、50 至 200 ksps、8 位 A/D 转换器
- MSP430I2021 - MSP430i2040 混合信号微控制器
- TLK2226 - 6 端口千兆以太网收发器
- SN74CBTS3384 - 具有肖特基二极管钳位功能的 10 位 FET 总线开关
- BQ24703 - 多化合物电池充电控制器和系统功率选择器
- CD74HCT534 - 具有三态输出的高速 CMOS 逻辑八路上升沿的 D 类反向触发器



