The UCC38050 and UCC38051 are PFC controllers for low-to-medium power applications requiring compliance with IEC 1000-3-2 harmonic reduction standard. It is designed for controlling a boost preregulator operating in transition mode (also referred to as boundary conduction mode or critical conduction mode operation). It features a transconductance voltage amplifier for feedback error processing, a simple multiplier for generating a current command proportional to the input voltage, a current-sense (PWM) comparator, PWM logic and a totem-pole driver for driving an external FET.

In the transition mode operation, the PWM circuit is self-oscillating with the turn-on being governed by an inductor zero-current detector (ZCD pin) and the turn-off being governed by the current-sense comparator. Additionally, the controller provides features such as peak current limit, default timer, overvoltage protection (OVP) and enable.

The UCC38050 and UCC38051, while being pin compatible with other industry controllers providing similar functionality, offer many feature enhancements and tighter specifications, leading to an overall reduction in system implementation cost. The system performance is enhanced by incorporation of zero power detect function which allows the controller output to shut down at light load conditions without running into overvoltage. The device also features innovative slew rate enhancement circuits which improve the large signal transient performance of the voltage error amplifier. The low start-up and operating currents of the device results in low power consumption and ease of start-up. Highly accurate internal bandgap reference leads to tight regulation of output voltage in normal and OVP conditions, resulting in higher system reliability. The enable comparator ensures that the controller is off if the feedback sense path is broken or if the input voltage is very low.

There are two key parameteric differences between UCC38050 and UCC38051. The UVLO turn-on threshold of UCC38050 is 15.8 V while for UCC38051 it is 12.5 V. Secondly, the gM amplifier’s source current for UCC38050 is typically 1.3 mA while for UCC38051 it is 300 µA. The higher UVLO turn-on threshold of the UCC38050 allows quicker and easier start-up with a smaller VCC capacitance while the lower UVLO turn-on threshold of UCC38051 allows the operation of the PFC chip to be easily controlled by the downsteam PWM controller in two-stage power converters. The UCC38050 gM amplifier also provides a full 1.3-mA typical source current for faster start-up and improved transient response when output is low either at start-up or during transient conditions. The UCC38051 scales this source current back down to 300-µA typical source current to gradually increase the error voltage preventing a step increase in line currents at start-up but still provides good transient response. The UCC38051 is suitable for multiple applications including AC adapters where a two-stage power conversion is needed. The UCC38050 is suitable for applications such as electronic ballasts where there is no down-stream PWM conversion and the advantages of smaller VCC capacitor and improved transient response can be realized.

Devices are available in either the industrial temperature range of –40°C to 105°C (UCC2805x) or commercial temperature range of 0°C to 70°C (UCC3805x). Package offerings are 8-pin SOIC (D) or 8-pin PDIP (P) packages.

• Transition Mode PFC Controller for Low Implementation Cost
• Industry Pin Compatibility With Improved Feature Set
• Improved Transient Response With Slew-Rate Comparator
• Zero Power Detect to Prevent OVP During Light Load Conditions
• Accurate Internal VREF for Tight Output Regulation
• Two UVLO Options
• Overvoltage Protection (OVP), Open-Feedback Protection and Enable Circuits
• ± 750-mA Peak Gate Drive Current
• Low Start-Up and Operating Currents
• Lead (Pb)-Free Packages
• APPLICATIONS
  • Switch-Mode Power Supplies for Desktops, Monitors, TVs and Set Top Boxes (STBs)
  • AC Adapter Front-End Power Supplies
  • Electronic Ballasts

• CD74HCT11 - 高速 CMOS 逻辑三路 3 输入与门
• CY54FCT273T - 具有清零端的八路 D 类触发器
• CDCP1803-EP - 具有可编程除法器的增强型产品 1.3 LVPECL 时钟缓冲器
• TLV7112525 - 采用 1.5mm X 1.5mm SON 封装的 200mA 输出、低噪声、高 PSRR、低压降双路稳压器
• LM27965 - 具有 I2C 兼容亮度控制的双路显示白光 LED 驱动器
• SN65LVDT348 - 具有 -4 至 5V 共模范围的四路 LVDS 接收器
• SN74AHC595 - 具有三态输出寄存器的 8 位移位寄存器
• TPA6166A2 - TPA 6166A2 3.5mm 插孔检测和耳机接口 IC
• LM2734Z-Q1 - 超薄 SOT23 1A 负载降压 DC-DC 稳压器
• MSP430FR58671 - MSP430FR58xx 混合信号微控制器