

- PGA302EPWR - 集成电路(IC) > 接口 > 传感器和检测器接口
- SN74AHCT541PW - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LMR38020SQDDARQ1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- TPS7B8133QDRVRQ1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- CSD95472Q5MCT - 集成电路(IC) > 电源管理(PMIC) > 全半桥驱动器
- SMJ320C6415DGADW60 - 集成电路(IC) > 嵌入式 > DSP(数字信号处理器)
- SN74AUP1G57DRLR - 集成电路(IC) > 逻辑 > 门和反相器 - 多功能,可配置
- SN74LS139ADRE4 - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- LM4132CMF-1.8/NOPB - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- LP2989IMMX-1.8/NOPB - 电源管理IC - 稳压器 - 线性
- SN74F258NSRG4 - 逻辑 - 信号开关,多路复用器,解码器
- UCC27322Q1EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- TPS629210-Q1EVM - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- SN74ACT241NSR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TLV5639IDWRG4 - 数据采集 - 数模转换器(DAC)
- TLC4502MDG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LM4928SDBD - 开发板,套件,编程器 > 评估板 > 音频放大器评估板
- TPS54040ADGQ - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- SN74AVCA406LGQSR - 集成电路(IC) > 逻辑 > 转换器,电平移位器
- TRF37A73EVM - 开发板,套件,编程器 > 评估板 > 射频评估和开发套件,板



BQ24064 - 具有热调节、TS、10.5V OVP 的单节锂电池充电器
BQ24064是TI德州仪器公司的一款电池充电器IC产品,BQ24064是具有热调节、TS、10.5V OVP 的单节锂电池充电器,本站介绍了BQ24064的封装应用图解、特点和优点、功能等,并给出了与BQ24064相关的TI元器件型号供参考。
BQ24064 - 具有热调节、TS、10.5V OVP 的单节锂电池充电器 - 电池充电器IC - 电池管理产品 - 德州仪器
The bq2406x series are highly integrated Li-Ion and Li-Pol linear chargers, targeted at space-limited portable applications. The bq2406x series offers a variety of safety features and functional options, while still implementing a complete charging system in a small package. The battery is charged in three phases: conditioning, constant or thermally regulated current, and constant voltage. Charge is terminated based on minimum current. An internal programmable charge timer provides a backup safety feature for charge termination and is dynamically adjusted during the thermal regulation phase. The bq2406x automatically re-starts the charge if the battery voltage falls below an internal threshold; sleep mode is set when the external input supply is removed. Multiple versions of this device family enable easy design of the bq2406x in cradle chargers or in the end equipment, while using low cost or high-end AC adapters.
- Ideal for Low-Dropout Designs for Single-Cell Li-Ion or Li-Pol Packs in Space Limited Applications
- Integrated Power FET and Current Sensor for up to 1-A Charge Applications
- Reverse Leakage Protection Prevents Battery Drainage
- ±0.5% Voltage Regulation Accuracy
- Thermal Regulation Maximizes Charge Rate
- Charge Termination by Minimum Current and Time
- Precharge Conditioning With Safety Timer
- Status Outputs for LED or System Interface Indicate Charge, Fault, and Power Good Outputs
- Short-Circuit and Thermal Protection
- Automatic Sleep Mode for Low Power Consumption
- Small 3×3 mm MLP Package
- Selectable Battery Insertion and Battery Absent Detection
- Input Overvoltage Protection
- 6.5 V and 10.5 V Options
- APPLICATIONS
- PDA, MP3 Players, Digital Cameras
- Internet Appliances and Handheld Devices
- SN74ABT162601 - 具有三态输出的 18 位通用总线收发器
- ADS7854 - 双核 1MSPS 16-/14-/12-位同步采样模数转换器
- TPD8S009 - 用于 HDMI/DisplayPort 的 8 通道 ESD 解决方案
- SN74AUP1G08 - 低功耗单路 2 输入正与门
- TAS5612A - 125 W 立体声/250W 单声道 PurePath? HD 数字输入功率级
- LMR14020-Q1 - 具有 40μA IQ 的汽车类 40V、2A SIMPLE SWITCHER、2.2MHz 降压稳压器
- TLC5952 - 具有全局亮度控制和 LED 开路/短路检测功能的 24 通道恒流 LED 驱动器
- SN54HC273-SP - 具有清零功能的八路 D 类触发器
- CDCE937-Q1 - 具有 2.5V 或 3.3V LVCMOS 输出的汽车类可编程 3-PLL VCXO 时钟合成器
- TMS320F2801 - 具有闪存的 32 位数字信号控制器



