

- LT1054IDWR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LP2987AIMM-2.5 - 电源管理IC - 稳压器 - 线性
- SN65LVDT101DGK - 集成电路(IC) > 接口 > 信号缓冲器、中继器、分离器
- BQ24090EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- TUSB7340RKMR - 集成电路(IC) > 接口 > 控制器
- TLV2721IDBVR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LM74900QRGERQ1 - 集成电路(IC) > 电源管理(PMIC) > OR 控制器,理想二极管
- PT6445N - 直流转换器
- SN74AS821FN - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TPS60310DGSG4 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- TLC59282EVM-118 - 开发板,套件,编程器 > 评估板 > LED 驱动器评估板
- LM2931Z-5.0/LFT2 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- UCC27322QDRQ1 - 集成电路(IC) > 电源管理(PMIC) > 栅极驱动器
- LM4140BCMX-1.0/NOPB - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- MSP430F5310IPTR - 集成电路(IC) > 嵌入式 > 微控制器
- TLV709A50PKR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LP3893ESX-1.2/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DS3695ATM/NOPB - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- SN65LVDM1676DGGR - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LM3354MMX-5.0/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器



BQ25010 - 单片锂离子充电器和 DC/DC 转换器 IC,输出可调节
BQ25010是TI德州仪器公司的一款电池充电器IC产品,BQ25010是单片锂离子充电器和 DC/DC 转换器 IC,输出可调节,本站介绍了BQ25010的封装应用图解、特点和优点、功能等,并给出了与BQ25010相关的TI元器件型号供参考。
BQ25010 - 单片锂离子充电器和 DC/DC 转换器 IC,输出可调节 - 电池充电器IC - 电池管理产品 - 德州仪器
The bq2501x series are highly integrated charge andpower management devices targeted at space-limited bluetooth applications. The bq2501x series offer integrated power FET and current sensor for charge control, reverse blocking protection, high accuracy current and voltage regulation, charge status, charge termination, and a highly efficient and low-power dc-dc converter in a small package.
The bq2501x charges the battery in three phases: conditioning, constant current and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety feature for charge termination. The bq2501x automatically re-starts the charge if the battery voltage falls below an internal threshold. The bq2501x automatically enters sleep mode when VCC supply is removed.
The integrated low-power high-efficiency dc-dc converter is designed to operate directly from a single-cell Li-Ion or Li-Pol battery pack. The output voltage is either adjustable from 0.7 V to VBAT (bq25010), fixed at 3.3 V (bq25011), or fixed at 1.8 V (bq25012), and is capable of delivering up to 150-mA of load current. The dc-dc converter operates at a synchronized 1 MHz switching frequency allowing for the use of small inductors.
- Li-Ion Or Li-Pol ChargeManagement and Synchronous DC-DC Power Conversion In a Single Chip
- Optimized for Powering Bluetooth™ Headsets and Accessories
- Charges and Powers the System from Either the AC Adapter or USB with Autonomous Power Source Selection
- Integrated USB Charge Control with Selectable 100 mA and 500 mA Charge Rates
- Integrated Power FET and Current Sensor for Up to 500 mA Charge Applications AND 100 mA DC-DC Controller with Integrated FETs
- Reverse Leakage Protection Prevents Battery Drainage
- Automatic Power Save Mode For High Efficiency at Low Current, or Forced PWM for Frequency Sensitive Applications
- 3.5 mm × 4.5 mm QFN Package
- APPLICATIONS
- Bluetooth™ Headsets
- Bluetooth™ Accessories
- Low-Power Handheld Devices
Bluetooth is a trademark of Bluetooth SIG, Inc.
- ADS5270 - 8 通道模数转换器
- CD74HCT356 - 具有三态输出的高速 CMOS 逻辑 8 输入多路复用器/寄存器
- SN54AHCT573 - 具有三态输出的八路透明 D 类锁存器
- SN74LVTH182512 - 具有 18 位通用总线收发器的 3.3V ABT 扫描测试设备
- TPS65257 - 具有 USB 开关的 4.5V 至 16V 输入、3A/2A/2A 输出三路同步降压转换器
- TPS2482 - 36V 热插拔控制器和 I2C 监控器
- CD74HCT257 - 具有同向三态输出的高速 CMOS 逻辑四路 2 输入多路复用器
- CD74HCT10 - 高速 CMOS 逻辑三路 3 输入与非门
- TMP107 - 具有双向 SMAART 线接口和 EEPROM 的数字温度传感器
- UA7808 - Positive-Voltage Regulators



