The '46A, '47A, and 'LS47 feature active-low outputs designed for driving, common-anode LEDs or incandescent indicators directly. The '48, 'LS48, and 'LS49 feature active-high outputs for driving lamp buffers or common-cathode LEDs. All of the circuits except 'LS49 have full ripple-blanking input/output controls and a lamp test input. The 'LS49 circuit incorporates a direct blanking input. Segment identification and resultant displays are shown below. Display patterns for BCD input counts above 9 are unique symbols to authenticate input conditions.

The '46A, '47A, '48, 'LS47, and 'LS48 circuits incorporate automatic leading and/or trailing-edge zero-blanking control (RBI\ and RBO\). Lamp test (LT\) of these types may be performed at any time when the BI\/RBO\ node is at a high level. All types (including the '49 and 'LS49) contain an overriding blanking input (BI\), which can be used to control the lamp intensity by pulsing or to inhibit the outputs. Inputs and outputs are entirely compatible for use with TTL logic outputs.

The SN54246/SN74246 and '247 and the SN54LS247/SN74LS247 and 'LS248 compose the 6 and the 9 with tails and were designed to offer the designer a choice between two indicator fonts.

• '46A, '47A, 'LS47 feature
  • Open-Collector Outputs Drive Indicators Directly
  • Lamp-Test Provision
  • Leading/Trailing Zero Suppression
• '48, 'LS48 feature
  • Internal Pull-Ups Eliminate Need for External Resistors
  • Lamp-Test Provision
  • Leading/Trailing Zero Suppression
• 'LS49 feature
  • Open-Collector Outputs
  • Blanking Input
• All Circuit Types Feature Lamp Intensity Modulation Capability

• LM26LV-Q1 - 汽车类 1.6 V，LLP-6 出厂预设温度开关和温度传感器
• UCC3583 - 开关模式二次侧后稳压器
• SN74ACT74-EP - 具有清零和预设功能的增强型产品双路上升沿 D 类触发器
• TPS2201 - 具有并行接口的 1A 双插槽 PC 卡电源开关
• LP2985-10 - 单输出 LDO、150mA、固定电压 (10V)、1.5% 容限、低静态电流、低噪声
• SN54LS01 - 具有集电极开路输出的四路 2 输入正与非门
• TPS3823-50 - 带有看门狗输入和手动复位功能的电源电压监控器
• LM2574HV - SIMPLE SWITCHER 0.5A 降压电压稳压器
• TPS7A4001 - 100V 输入、50mA，单输出低压降线性稳压器
• SN74AS151 - 8 选 1 数据选择器/多路复用器