

- UC3855ADWTR - 集成电路(IC) > 电源管理(PMIC) > PFC(功率因数校正)
- HVACIMTR - 开发板,套件,编程器 > 开发板,编程器配件
- LM2575HVT-5.0/LB03 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- SN74LV4052AQDYYRQ1 - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- TLC1549CDG4 - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- TL16C550DPFB - 集成电路(IC) > 接口 > UART(通用异步接收器发送器)
- BQ24205DGNR - 集成电路(IC) > 电源管理(PMIC) > 电池充电器
- LM20CIM7/NOPB - 传感器,变送器 > 温度传感器 > 模拟和数字输出
- UC5603DP - 集成电路(IC) > 接口 > 信号端接器
- SN74LVC1G66DCKJ - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- SN74V215-15PAG - 集成电路(IC) > 逻辑 > FIFO 存储器
- SN74ACT3622-30PCB - 集成电路(IC) > 逻辑 > FIFO 存储器
- TPS7A15C08PYCKR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- ISOW7842FDWER - 隔离器 > 数字隔离器
- SN74LVC244ADGSRQ1 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- SN74LVT244BPWRE4 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- DAC7742YB/2KG4 - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- TPSM82843678EVM057 - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- IWR6443AQGABLR - 射频和无线 > 射频收发器 IC
- SN74AS245DW - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器



BQ25012 - 单片锂离子充电器和 DC/DC 转换器 IC,输出 1.8V
BQ25012是TI德州仪器公司的一款电池充电器IC产品,BQ25012是单片锂离子充电器和 DC/DC 转换器 IC,输出 1.8V,本站介绍了BQ25012的封装应用图解、特点和优点、功能等,并给出了与BQ25012相关的TI元器件型号供参考。
BQ25012 - 单片锂离子充电器和 DC/DC 转换器 IC,输出 1.8V - 电池充电器IC - 电池管理产品 - 德州仪器
The bq2501x series are highly integrated charge andpower management devices targeted at space-limited bluetooth applications. The bq2501x series offer integrated power FET and current sensor for charge control, reverse blocking protection, high accuracy current and voltage regulation, charge status, charge termination, and a highly efficient and low-power dc-dc converter in a small package.
The bq2501x charges the battery in three phases: conditioning, constant current and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety feature for charge termination. The bq2501x automatically re-starts the charge if the battery voltage falls below an internal threshold. The bq2501x automatically enters sleep mode when VCC supply is removed.
The integrated low-power high-efficiency dc-dc converter is designed to operate directly from a single-cell Li-Ion or Li-Pol battery pack. The output voltage is either adjustable from 0.7 V to VBAT (bq25010), fixed at 3.3 V (bq25011), or fixed at 1.8 V (bq25012), and is capable of delivering up to 150-mA of load current. The dc-dc converter operates at a synchronized 1 MHz switching frequency allowing for the use of small inductors.
- Li-Ion Or Li-Pol ChargeManagement and Synchronous DC-DC Power Conversion In a Single Chip
- Optimized for Powering Bluetooth™ Headsets and Accessories
- Charges and Powers the System from Either the AC Adapter or USB with Autonomous Power Source Selection
- Integrated USB Charge Control with Selectable 100 mA and 500 mA Charge Rates
- Integrated Power FET and Current Sensor for Up to 500 mA Charge Applications AND 100 mA DC-DC Controller with Integrated FETs
- Reverse Leakage Protection Prevents Battery Drainage
- Automatic Power Save Mode For High Efficiency at Low Current, or Forced PWM for Frequency Sensitive Applications
- 3.5 mm × 4.5 mm QFN Package
- APPLICATIONS
- Bluetooth™ Headsets
- Bluetooth™ Accessories
- Low-Power Handheld Devices
Bluetooth is a trademark of Bluetooth SIG, Inc.
- INA2137 - 音频差动线路接收器、+-6dB(G=1/2 或 2)
- SN74LV595A - 具有三态输出寄存器的 8 位移位寄存器
- TPS63031 - High Efficient Single Inductor Buck-Boost Converter w/1.8-A Switches
- RM46L450 - 16/32 位 RISC 闪存微处理器
- TPS40055-EP - 增强型产品宽输入同步降压控制器
- LM96511 - 具有 16 个过采样 CT ADC 和有源 CW M 的全集成 8 通道超声波模拟前端
- BQ24030-Q1 - 汽车类单片充电和系统电源路径管理 IC (bqTINY)
- TMP124 - 具有 SPI 接口的 ±1°C 温度传感器,支持报警功能,采用 SOIC 封装
- LP3871 - 0.8A 快速超低压降线性稳压器
- ADS6128 - 低功耗 12 位 210MSPS ADC



