

- JM4019ABFA - 集成电路(IC) > 逻辑 > 门和反相器
- BQ7790400PW - 集成电路(IC) > 电源管理(PMIC) > 电池管理
- PCA9539DW - 集成电路(IC) > 接口 > I/O 扩展器
- ADC3424IRTQT - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- TPS74301KTWTG3 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN65LVDS96DGGG4 - 集成电路(IC) > 接口 > 串行器,解串器
- SN74AHC594NSR - 集成电路(IC) > 逻辑 > 移位寄存器
- TLV7111225DSET - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- UA78M33CKVURG3 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TL1451CPWR - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- LM3424BKBSTEVAL/NOPB - 开发板,套件,编程器 > 评估板 > LED 驱动器评估板
- TLV809I50DBZR - 集成电路(IC) > 电源管理(PMIC) > 监控器
- SN74HCT04ANSR - 集成电路(IC) > 逻辑 > 门和反相器
- MSP430F2112TRHBT - 集成电路(IC) > 嵌入式 > 微控制器
- LM43602DSUT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- TPS92001D - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- AM5729BABCXEA - 集成电路(IC) > 嵌入式 > 微处理器
- SN74ALS03BDR - 集成电路(IC) > 逻辑 > 门和反相器
- CD74HCT86EG4 - 集成电路(IC) > 逻辑 > 门和反相器
- BQ2057TTSG4 - 集成电路(IC) > 电源管理(PMIC) > 电池充电器



BQ4845Y - 具有 NVSRAM 控制、看门狗定时器、上电复位、中断与电池低电警告的 RTC IC
BQ4845Y是TI德州仪器公司的一款无产品,BQ4845Y是具有 NVSRAM 控制、看门狗定时器、上电复位、中断与电池低电警告的 RTC IC,本站介绍了BQ4845Y的封装应用图解、特点和优点、功能等,并给出了与BQ4845Y相关的TI元器件型号供参考。
BQ4845Y - 具有 NVSRAM 控制、看门狗定时器、上电复位、中断与电池低电警告的 RTC IC - 无 - 实时时钟 - 德州仪器
The bq4845 Real-Time Clock is a low-power microprocessor peripheral that integrates a time-of-day clock, a 100-year calendar, and a CPU supervisor in a 28-pin SOIC or DIP. The bq4845 is ideal for fax machines, copiers, industrial control systems, point-of-sale terminals, data loggers, and computers.
The bq4845 provides direct connections for a 32.768KHz quartz crystal and a 3V backup battery. Through the use of the conditional chip enable output (CE\OUT) and battery voltage output (VOUT) pins, the bq4845 can write-protect and make nonvolatile external SRAMs. The backup cell powers the real-time clock and maintains SRAM information in the absence of system voltage.
The bq4845 contains a temperature-compensated reference and comparator circuit that monitors the status of its voltage supply. When the bq4845 detects an out-of-tolerance condition, it generates an interrupt warning and subsequently a microprocessor reset. The reset stays active for 200ms after VCC rises within tolerance, to allow for power supply and processor stabilization.
The bq4845 also has a built-in watchdog timer to monitor processor operation. If the microprocessor does not toggle the watchdog input (WDI) within the programmed time-out period, the bq4845 asserts WDO\ and RST\. WDI unconnected disables the watchdog timer.
The bq4845 can generate other interrupts based on a clock alarm condition or a periodic setting. The alarm interrupt can be set to occur from once per second to once per month. The alarm can be made active in the battery-backup mode to serve as a system wake-up call. For interrupts at a rate beyond once per second, the periodic interrupt can be programmed with periods of 30.5us to 500ms.
- Real-Time Clock counts seconds through years in BCD format
- On-chip battery-backup switchover circuit with nonvolatile control for external SRAM
- Less than 500nA of clock operation current in backup mode
- Microprocessor reset valid to VCC =VSS
- Independent watchdog timer with a programmable time-out period
- Power-fail interrupt warning
- Programmable clock alarm interrupt active in battery-backup mode
- Programmable periodic interrupt
- Battery-low warning
- TPS5481 - 湿滞开关稳压器
- LMC568 - 低功耗锁相环
- TPS3836L30-Q1 - 具有 10ms/200ms 可选择延迟时间的汽车类 220nA 监控器
- DS92LV2411 - 5-50MHz 24 位频道链接 II 串行器
- TPS61280 - 电池前端 DC/DC 转换器,同步升压/旁路。1S 锂离子、富镍、硅阳极
- UCC3804 - 低功耗 BiCMOS 电流模式 PWM
- TPS2111A - 自动切换电源多路复用器
- SN74AHC32 - 四路 2 输入正或门
- ADS7854 - 双核 1MSPS 16-/14-/12-位同步采样模数转换器
- L293 - 四路半高驱动器



