CC1110-CC1111是TI公司的一款SimpleLinkCC1x产品，CC1110-CC1111是低于 1GHz、具有 MCU 和高达 32kB 闪存的片上系统，本页介绍了CC1110-CC1111的产品说明、应用、特性等，并给出了与CC1110-CC1111相关的TI元器件型号供参考。
CC1110-CC1111 - 低于 1GHz、具有 MCU 和高达 32kB 闪存的片上系统 - SimpleLinkCC1x - 无线MCU - TI公司（Texas Instruments，德州仪器）
The CC1110Fx, CC1111Fx is a true low-power sub- 1 GHz system-on-chip (SoC) designed for low power wireless applications. The CC1110Fx, CC1111Fx combines the excellent performance of the state-of-the-art RF transceiver CC1101 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and up to 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.
The CC1110Fx, CC1111Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC1111Fx adds a full-speed USB 2.0 interface to the feature set of the CC1110Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.
- Radio
- High-performance RF transceiver based on the market-leading CC1101
- Excellent receiver selectivity and blocking performance
- High sensitivity (–110 dBm at 1.2 kBaud)
- Programmable data rate up to 500 kBaud
- Programmable output power up to 10 dBm for all supported frequencies
- Frequency range: 300 – 348 MHz, 391 – 464 MHz and 782 – 928 MHz
- Digital RSSI / LQI support
- Low Power
- Low current consumption (RX: 16.2 mA at 1.2 kBaud, TX: 15.2 mA at −6 dBm output power)
- 0.3 µA in PM3 (the operating mode with the lowest power consumption)
- 0.5 µA in PM2 (operating mode with the second lowest power consumption, timer or external interrupt wakeup)
- RoHS Compliant 6 mm × 6 mm QFN-40 Package
- MCU, Memory, and Peripherals
- High performance and low power 8051 microcontroller core.
- Powerful DMA functionality
- 8/16/32 KB in-system programmable flash, and 1, 2, 4 KB RAM
- Full-Speed USB Controller with 1 KB FIFO (CC1111Fx)
- 128-bit AES security coprocessor
- 7 – 12 bit ADC with up to eight inputs
- I2S interface
- Two USARTs
- 16-bit timer with DSM mode
- Three 8-bit timers
- Hardware debug support
- 21 (CC1110Fx) or 19 (CC1111Fx) GPIO pins
- SW compatible with CC2510Fx, CC2511Fx
- General
- Wide supply voltage range (2.0V – 3.6V)
- RoHS compliant 6×6 mm QFN 36 package
