CD4536B - CMOS 可编程定时器

CD4536B是TI德州仪器公司的一款比率乘法器/分频器/定时器产品，CD4536B是CMOS 可编程定时器，本站介绍了CD4536B的封装应用图解、特点和优点、功能等，并给出了与CD4536B相关的TI元器件型号供参考。

CD4536B - CMOS 可编程定时器 - 比率乘法器/分频器/定时器 - 特殊逻辑 - 德州仪器

产品描述

CD4536B is a programmable timer consisting of 24 ripple-binary counter stages. The salient feature of this device is its flexibility. The device can count from 1 to 224 or the first 8 stages can be bypassed to allow an output, selectable by a 4-bit code, from any one of the remaining 16 stages. It can be driven by an external clock or an RC oscillator that can be constructed using on-chip components. Input IN1 serves as either the external clock input or the input to the on-chip RC oscillator. OUT1 and OUT2 are connection terminals for the external RC components. In addition, an on-chip monostable circuit is provided to allow a variable pulse width output. Various timing functions can be achieved using combinations of these capabilities.

A logic 1 on the 8-BYPASS input enables a bypass of the first 8 stages and makes stage 9 the first counter stage of the last 16 stages. Selection of 1 of 16 outputs is accomplished by the decoder and the BCD inputs A, B, C and D. MONO IN is the timing input for the on-chip monostable oscillator. Grounding of the MONO IN terminal through a resistor of 10K ohms or higher, disables the one-shot circuit and connects the decoder directly to the DECODE OUT terminal. A resistor to VDD and a capacitor to ground from the MONO IN terminal enables the one-shot circuit and control its pulse width.

A fast test mode is enabled by a logic 1 on 8-BYPASS, SET, and RESET. This mode divides the 24-stage counter into three 8-stage sections to facilitate a fast test sequence.

The CD4536B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (DW, DWR, and NSR suffixes), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).

产品特性

24 flip-flop stages - - counts from 20 to 224
Last 16 stages selectable by BCD select code
Bypass input allows bypassing first 8 stages
On-chip RC oscillator provision
Clock inhibit input
Schmitt-trigger in clock line permits operation with very long rise and fall times
On-chip monostable output provision
Typical fCL = 3 MHz at VDD = 10 V
Test mode allows fast test sequence
Set and reset inputs
Capable of driving two low power TTL loads, one lower-power Schottky load, or two HTL loads over the rated temperature range
Standardized, symmetrical output characteristics
100% tested for quiescent current at 20 V
5-V, 10-V, and 15-V parametric ratings
Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of ’B’ Series CMOS Devices"

下面可能是您感兴趣的TI德州仪器公司比率乘法器/分频器/定时器元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购