TI,TI公司,TI代理商
TI(德州仪器)| TI产品型号搜索
专营TI元器件,强大的现货交付能力,解决您的采购难题
全流程提供TI现货供应链服务
当前位置:TI公司 > > TI芯片 >> CD74HCT123
CD74HCT123技术文档下载:
CD74HCT123技术文档产品手册下载
CD74HCT123 - 产品图解:
CD74HCT123-具有复位功能的高速 CMOS 逻辑双路可重触发单稳多频振荡器
承诺原装正品
专营TI,真正优化您的供应链
TI产品 - CD74HCT123介绍
CD74HCT123 - 具有复位功能的高速 CMOS 逻辑双路可重触发单稳多频振荡器

CD74HCT123是TI公司的一款单稳多频振荡器产品,CD74HCT123是具有复位功能的高速 CMOS 逻辑双路可重触发单稳多频振荡器,本页介绍了CD74HCT123的产品说明、应用、特性等,并给出了与CD74HCT123相关的TI元器件型号供参考。

CD74HCT123 - 具有复位功能的高速 CMOS 逻辑双路可重触发单稳多频振荡器 - 单稳多频振荡器 - 特殊逻辑 - TI公司(Texas Instruments,德州仪器)

产品描述

The ’HC123, ’HCT123, CD74HC423 and CD74HCT423 are dual monostable multivibrators with resets. They are all retriggerable and differ only in that the 123 types can be triggered by a negative to positive reset pulse; whereas the 423 types do not have this feature. An external resistor (RX) and an external capacitor (CX) control the timing and the accuracy for the circuit. Adjustment of Rx and CX provides a wide range of output pulse widths from the Q and Q\ terminals. Pulse triggering on the A\ and B inputs occur at a particular voltage level and is not related to the rise and fall times of the trigger pulses.

Once triggered, the output pulse width may be extended by retriggering inputs A\ and B. The output pulse can be terminated by a LOW level on the Reset (R) pin. Trailing edge triggering (A)\ and leading edge triggering (B) inputs are provided for triggering from either edge of the input pulse. If either Mono is not used each input on the unused device (A\, B, and R\) must be terminated high or low.

The minimum value of external resistance, Rx is typically 5k. The minimum value external capacitance, CX, is 0pF. The calculation for the pulse width is tW = 0.45 RXCX at VCC = 5V.

产品特性

  • Overriding Reset Terminates Output Pulse
  • Triggering From the Leading or Trailing Edge
  • Q and Q\ Buffered Outputs
  • Separate Resets
  • Wide Range of Output-Pulse Widths
  • Schmitt Trigger on Both A\ and B Inputs
  • Fanout (Over Temperature Range)
    • Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads
    • Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads
  • Wide Operating Temperature Range . . . –55°C to 125°C
  • Balanced Propagation Delay and Transition Times
  • Significant Power Reduction Compared to LSTTL Logic ICs
  • HC Types
    • 2V to 6V Operation
    • High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V
  • HCT Types
    • 4.5V to 5.5V Operation
    • Direct LSTTL Input Logic Compatibility, VIL = 0.8V (Max), VIH = 2V (Min)
    • CMOS Input Compatibility, Il 1µA at VOL, VOH

下面可能是您感兴趣的TI公司单稳多频振荡器元器件
  • SN75LVDS391 - 四路 LVDS 发送器
  • ADS7952-Q1 - 汽车类 12位、1MSPS、12 通道单端微功耗串行接口 ADC
  • TPD1S514 - USB 充电器,VBUS_CON 引脚带过压、电涌和 ESD 保护
  • SN74ALS518 - 具有使能端的八路二进制/BCD 等值比较器
  • SN74AHC32-EP - 增强型产品四路 2 输入正或门
  • LM9070 - 具有保持连接开/关控制的低压降系统电压稳压器
  • DAC34H84 - 4 通道 16 位 1.25GSPS 数模转换器
  • DAC7578 - 12 位、8 通道、超低短时脉冲波形干扰、电压输出、2 线接口 DAC
  • TPS3838K33-Q1 - 具有 10ms/200ms 可选择延迟时间的汽车类 220nA 监控器
  • CD74HCT32 - 高速 CMOS 逻辑四路 2 输入或门
  • 节约时间成本,提高采购效率,TI官网授权代理
    TI公司|TI德州仪器|德州仪器TI公司代理商|TI芯片代理商
    TI公司产品现货专家,订购TI公司产品不限最低起订量,TI产品大陆现货即时发货,香港库存3-5天发货,海外库存7-10天发货
    寻找全球TI代理商现货货源 - TI公司(德州仪器)电子元件在线订购