• 0.55-Inch Micromirror Array Diagonal
  • 1024 × 768 Array of Aluminum, Micrometer-Sized Mirrors (XGA Resolution)
  • 10.8-µm Micromirror Pitch
  • ±12° Micromirror Tilt Angle (Relative to Flat State)
  • Designed for Corner Illumination
• Designed for Use With Broadband Visible Light (420 nm – 700 nm):
  • Window Transmission 97% (Single Pass, Through Two Window Surfaces)
  • Micromirror Reflectivity 88%
  • Array Diffraction Efficiency 86%
  • Array Fill Factor 92%
• 16-Bit, Low Voltage Differential Signaling (LVDS) Double Data Rate (DDR) Input Data Bus
• 200 MHz Input Data Clock Rate
• Dedicated DLPC200 Controller for High-Speed Pattern Rates:
  • 5,000 Hz (1-Bit Binary Patterns)
  • 500 Hz (8-Bit Grayscale Patterns)
• Series 450 Package Characteristics:
  • Thermal Area 18 mm × 12 mm Enabling High on Screen Lumens (>2000 lm)
  • 149 Micro Pin Grid Array Robust Electrical Connection
  • Package Mates to Amphenol InterCon Systems 450-2.700-L-13.25-149 Socket

• Industrial
  • 3D Scanners for Machine Vision and Quality Control
  • 3D Printing
  • Direct Imaging Lithography
  • Laser Marking and Repair
  • Industrial and Medical Imaging
  • Medical Instrumentation
  • Digital Exposure Systems
• Medical
  • Opthamology
  • 3D Scanners for Limb and Skin Measurement
  • Hyperspectral Imaging
• Displays
  • 3D Imaging Microscopes
  • Intelligent and Adaptive Lighting

Featuring over 750000 micromirrors, the high resolution DLP5500 (0.55" XGA) digital micromirror device (DMD) is a spatial light modulator (SLM) that modulates the amplitude, direction, and/or phase of incoming light. This advanced light control technology has numerous applications in the industrial, medical, and consumer markets. The DLP5500 enables fine resolution for 3D printing applications.