DS16F95 - EIA-485/EIA-422A 差动总线收发器 [已停产]

DS16F95是TI德州仪器公司的一款无产品，DS16F95是EIA-485/EIA-422A 差动总线收发器 [已停产]，本站介绍了DS16F95的封装应用图解、特点和优点、功能等，并给出了与DS16F95相关的TI元器件型号供参考。

DS16F95 - EIA-485/EIA-422A 差动总线收发器 [已停产] - 无 - RS-485收发器 - 德州仪器

产品描述

The DS16F95/DS36F95 Differential Bus Transceiver is a monolithic integrated circuit designed for bidirectional data communication on balanced multipoint bus transmission lines. The transceiver meets both EIA-485 and EIA-422A standards.

The DS16F95/DS36F95 offers improved performance due to the use of L-FAST bipolar technology. The L-FAST technology allows for higher speeds and lower currents by minimizing gate delay times. Thus, the DS16F95 and DS36F95 consume less power, and feature an extended temperature range as well as improved specifications.

The DS16F95/DS36F95 combines a Tri-state differential line driver and a differential input line receiver, both of which operate from a single 5.0V power supply. The driver and receiver have an active Enable that can be externally connected to function as a direction control. The driver differential outputs and the receiver differential inputs are internally connected to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus whenever the driver is disabled or when VCC = 0V. These ports feature wide positive and negative common mode voltage ranges, making the device suitable for multipoint applications in noisy environments.

The driver is designed to accommodate loads of up to 60mA of sink or source current and features positive and negative current limiting in addition to thermal shutdown for protection from line fault conditions.

The DS16F95/DS36F95 can be used in transmission line applications employing the DS96F172 and the DS96F174 quad differential line drivers and the DS96F173 and DS96F175 quad differential line receivers.

产品特性

Meets EIA-485 and EIA-422A
Meets SCSI-1 (5 MHZ) Specifications
Designed for Multipoint Transmission
Wide Positive and Negative Input/Output Bus Voltage Ranges
Thermal Shutdown Protection
Driver Positive and Negative Current-Limiting
High Impedance Receiver Input
Receiver Input Hysteresis of 50 mV Typical
Operates from Single 5.0V Supply
Reduced Power Consumption
Pin Compatible with DS3695 and SN75176A
Military Temperature Range Available
Qualified for MIL-STD 883C
Standard Military Drawings (SMD) Available
Available in 8-Pin CDIP (NAB0008A) or SOIC (D) Package

下面可能是您感兴趣的TI德州仪器公司无元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购