DS92LV040A是TI公司的一款多点LVDS(MLVDS/BLVDS/LVDM)产品，DS92LV040A是4 通道总线 LVDS 收发器，本页介绍了DS92LV040A的产品说明、应用、特性等，并给出了与DS92LV040A相关的TI元器件型号供参考。
DS92LV040A - 4 通道总线 LVDS 收发器 - 多点LVDS(MLVDS/BLVDS/LVDM) - LVDS/M-LVDS/ECL/CML - TI公司（Texas Instruments，德州仪器）
The DS92LV040A is one in a series of Bus LVDS transceivers designed specifically for high speed, low power backplane or cable interfaces. The device operates from a single 3.3V power supply and includes four differential line drivers and four receivers. To minimize bus loading, the driver outputs and receiver inputs are internally connected. The device also features a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector.
The driver translates 3V LVTTL levels (single-ended) to differential Bus LVDS (BLVDS) output levels. This allows for high speed operation while consuming minimal power and reducing EMI. In addition, the differential signaling provides common mode noise rejection greater than ±1V.
The receiver threshold is less than +0/−70 mV. The receiver translates the differential Bus LVDS to standard (LVTTL/LVCMOS) levels. (See the Applications Information Section for more details.)
- Bus LVDS Signaling
- Propagation Delay: Driver 2.3ns max, Receiver 3.2ns max
- Low power CMOS Design
- 100% Transition Time 1ns Driver Typical, 1.3ns Receiver Typical
- High Signaling Rate Capability (above 155 Mbps)
- 0.1V to 2.3V Common Mode Range for VID = 200mV
- 70 mV Receiver Sensitivity
- Supports Open and Terminated Failsafe on Port Pins
- 3.3V Operation
- Glitch Free Power up/down (Driver & Receiver Disabled)
- Light Bus Loading (5 pF typical) per Bus LVDS Load
- Designed for Double Termination Applications
- Balanced Output Impedance
- Product Offered in 44 Pin WQFN Package
- High Impedance Bus Pins on Power Off (VCC = 0V)
