

- ADC08L060CIMT/NOPB - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- LM2937ET-2.5/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- REG102GA-5 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LM4882MM/NOPB - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- TPS2066DGN - 集成电路(IC) > 电源管理(PMIC) > 配电开关,负载驱动器
- INA296B4QDRQ1 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- ISO3086TDWR - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- OPA2354AQDGKRQ1 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LMV772QMMX/NOPB - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- DS92LV1021AMSA - 集成电路(IC) > 接口 > 串行器,解串器
- LM5026EVAL - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- TLV2464CPWR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LP38858S-0.8/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DAC8830ICDTG4 - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- IWRL1432BOOST-BSD - 开发板,套件,编程器 > 评估板 > 扩展板,子卡
- SN74ALVCHR16245KR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- SN74S124D - 集成电路(IC) > 时钟/定时 > 可编程定时器和振荡器
- TLC2274CNSR-A - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TUSB1044RNQR - 集成电路(IC) > 接口 > 信号缓冲器、中继器、分离器
- 1A1G04QDBVRG4Q1 - 集成电路(IC) > 逻辑 > 门和反相器



INA209 - 26V、双向、低侧/高侧、I2C 输出电流/功率监控器和高速比较器
INA209是TI德州仪器公司的一款电流分流比较器产品,INA209是26V、双向、低侧/高侧、I2C 输出电流/功率监控器和高速比较器,本站介绍了INA209的封装应用图解、特点和优点、功能等,并给出了与INA209相关的TI元器件型号供参考。
INA209 - 26V、双向、低侧/高侧、I2C 输出电流/功率监控器和高速比较器 - 电流分流比较器 - 电流感应放大器 - 德州仪器
The INA209 is a high-side current shunt and power monitor with an I2C interface. The INA209 monitors both shunt drop and shunt bus voltage. A programmable calibration value, combined with an internal multiplier, enables direct readouts in amperes. An additional multiplying register calculates power in watts. The INA209 features two separate, onboard watchdog capabilities: a warning comparator and an over-limit comparator. The warning comparator is useful for monitoring lower warning limits and incorporates a user-defined delay. The over-limit comparator assists with monitoring upper limits that could require immediate system shutdown.
The INA209 also includes an analog comparator and a programmable digital-to-analog converter (DAC) that combine to provide the fastest possible responses to current overload conditions.
The INA209 can be used together with hot swap controllers that already use a current sense resistor. The INA209 full-scale range can be selected to be either within the hot-swap controller sense limits, or wide enough to include them.
The INA209 senses across shunts on buses that can vary from 0V to 26V. The device uses a single +3V to +5.5V supply, drawing a maximum of 1.5mA of supply current. It is specified for operation from -25°C to +85°C.
- SENSES BUS VOLTAGES FROM 0V TO +26V
- REPORTS CURRENT, VOLTAGE, AND POWER; STORES PEAKS
- TRIPLE WATCHDOG LIMITS:
- Lower Warning with Delay
- Upper Over-limit, No Delay
- Fast Analog Critical
- HIGH ACCURACY: 1% MAX OVER TEMP
- APPLICATIONS
- SERVERS
- TELECOM EQUIPMENT
- AUTOMOTIVE
- POWER MANAGEMENT
- BATTERY CHARGERS
- WELDING EQUIPMENT
- POWER SUPPLIES
- TEST EQUIPMENT
I2C is a trademark of NXP Semiconductors. All other trademarks are the property of their respective owners.
- UCC27519 - 4A/4A 单通道高速低侧栅极驱动器
- SN74AVC2T244 - 双位双电源总线收发器
- ISO7310C - 低功耗单通道数字隔离器
- UCC28711 - 具有一次侧稳压功能的恒压、恒流控制器
- INA195 - -16V 至 +80V、低侧/高侧、高速、电压输出电流分流监控器
- DS91D180 - 100 MHz M-LVDS 线路驱动器/接收器对
- SN75ALS195 - 四路差动线路接收器
- DRV10975 - DRV10983、DRV10975 12V 到 24V 三相无传感器 BLDC 电机驱动器
- INA170 - 60V、高侧、双向、高速、电流输出电流分流监控器
- TPS61261 - 具有 3.3 输出电压的小型低输入电压升压转换器



