ISO7631FC - 4kVpk 低功耗三通道、25Mbps 数字隔离器

ISO7631FC是TI德州仪器公司的一款无产品，ISO7631FC是4kVpk 低功耗三通道、25Mbps 数字隔离器，本站介绍了ISO7631FC的封装应用图解、特点和优点、功能等，并给出了与ISO7631FC相关的TI元器件型号供参考。

ISO7631FC - 4kVpk 低功耗三通道、25Mbps 数字隔离器 - 无 - 数字隔离器 - 德州仪器

产品特性

Signaling Rate: 150 Mbps (M-Grade), 25 Mbps (C-Grade)
Robust Design with Integrated Noise Filter (C-Grade)
Low Power Consumption, Typical ICC per Channel (3.3-V Supplies):
- ISO7631FM: 2 mA at 10 Mbps
- ISO7631FC: 1.5 mA at 10 Mbps
- ISO7641FC: 1.3 mA at 10 Mbps
Extremely-Low ICC_disable (C-Grade)
Low Propagation Delay: 7 ns Typical (M-Grade)
Output Defaults to Low-State in Fail-Safe Mode
Wide Temperature Range: –40°C to 125°C
50 KV/µs Transient Immunity, Typical
Long Life With SiO2 Isolation Barrier
Operates From 2.7-V (M-Grade), 3.3-V and 5-V Supply and Logic Levels
2.7-V (M-Grade), 3.3-V and 5-V Level Translation
Wide Body SOIC-16 Package
Safety and Regulatory Approvals
- 2500 VRMS Isolation for 1 Minute per UL 1577
- 4242 VPK Basic Insulation per DIN V VDE V 0884-10 and DIN EN 61010-1
- CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 End Equipment Standards
- CQC Certification per GB4943.1-2011
- TUV 3000 VRMS Reinforced Insulation according to EN/UL/CSA 60950-1 and EN/UL/CSA 61010-1

产品应用

Optocoupler Replacement in:
- Industrial Fieldbus
  - Profibus
  - Modbus
  - DeviceNet™ Data Buses
- Servo Control Interface
- Motor Control
- Power Supplies
- Battery Packs

产品说明

The ISO7631F and ISO7641F devices provide galvanic isolation up to 4242 VPK per VDE. The ISO7631F device has three channels, two of which operate in the forward direction and one which operates in the reverse direction. The ISO7641F device has 4 channels, three of which operate in the forward direction and one of which operates in the reverse direction. Suffix F indicates that output defaults to low-state in fail-safe conditions (see ). M-Grade devices are high-speed isolators capable of up to150-Mbps data rates with fast propagation delays, whereas C-Grade devices are capable of up to 25-Mbps data rates with low power consumption and integrated filters for noise-prone applications. C-Grade devices are recommended for lower-speed applications where input noise pulses of less than 6 ns duration must be suppressed, or when low-power consumption is critical.

Each isolation channel has a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. The devices have TTL input thresholds and can operate from 2.7-V (M-Grade), 3.3-V and 5-V supplies. All inputs are 5-V tolerant when supplied from 3.3-V or 2.7-V supplies.

产品器件信息

PART NUMBER	PACKAGE	BODY SIZE (NOM)
ISO7631FM	SOIC (16)	10.30 mm × 7.50 mm
ISO7631FC
ISO7641FC

下面可能是您感兴趣的TI德州仪器公司无元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购