

- TRF3722IRGZT - 射频和无线 > RF 调制器
- MCT8315A1VRGFR - 集成电路(IC) > 电源管理(PMIC) > 电机驱动器,控制器
- SN65LBC175DWR - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- TLV320AIC34EVM-K - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- ADS1000A1IDBVT - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- SN74CBTR16861DL - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- LM4873MTE/NOPB - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- SN64BCT125ADRG4 - 逻辑 - 缓冲器,驱动器,接收器,收发器
- LMS1587CSX-ADJ/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LMX25311312EVAL - 评估和演示板及套件
- LP2992IM5-3.0 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- OPA2333SKGD1 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- DP8344BV - 集成电路(IC) > 嵌入式 > 微处理器
- UCC21732QDWEVM-025 - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- SN74BCT244DBRE4 - 逻辑 - 缓冲器,驱动器,接收器,收发器
- LM3S5P31-IQC80-C0 - 集成电路(IC) > 嵌入式 > 微控制器
- THS3110IDGNR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS3842A015DRLRQ1 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- SNJ54LS242FK - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TSV912AIDDFR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器



L293D - 四路半高驱动器
L293D是TI德州仪器公司的一款外围驱动器和传动器产品,L293D是四路半高驱动器,本站介绍了L293D的封装应用图解、特点和优点、功能等,并给出了与L293D相关的TI元器件型号供参考。
L293D - 四路半高驱动器 - 外围驱动器和传动器 - 其它接口 - 德州仪器
The L293 and L293D are quadruple high-current half-H drivers. The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. Both devices are designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.
All inputs are TTL compatible. Each output is a complete totem-pole drive circuit, with a Darlington transistor sink and a pseudo-Darlington source. Drivers are enabled in pairs, with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. When an enable input is high, the associated drivers are enabled and their outputs are active and in phase with their inputs. When the enable input is low, those drivers are disabled and their outputs are off and in the high-impedance state. With the proper data inputs, each pair of drivers forms a full-H (or bridge) reversible drive suitable for solenoid or motor applications.
On the L293, external high-speed output clamp diodes should be used for inductive transient suppression.
A VCC1 terminal, separate from VCC2, is provided for the logic inputs to minimize device power dissipation.
The L293and L293D are characterized for operation from 0°C to 70°C.
- Featuring Unitrode L293 and L293D Products Now From Texas Instruments
- Wide Supply-Voltage Range: 4.5 V to 36 V
- Separate Input-Logic Supply
- Internal ESD Protection
- Thermal Shutdown
- High-Noise-Immunity Inputs
- Functional Replacements for SGS L293 and SGS L293D
- Output Current 1 A Per Channel (600 mA for L293D)
- Peak Output Current 2 A Per Channel (1.2 A for L293D)
- Output Clamp Diodes for Inductive Transient Suppression (L293D)
- TPS3801L30 - 处理器监控电路
- CD74HC132 - 高速 CMOS 逻辑四路 2 输入施密特触发与非门
- TPS61071 - 采用小型 SOT-23 封装的可调节 600mA 开关式 90% 效率 PWM 升压转换器
- SN65LVDT41-EP - 增强型产品 Memorystick(Tm) 互连扩展器芯片组
- MAX211 - 具有 ?15kV ESD 保护的 5V 多通道 RS-232 线路驱动器/接收器
- TLV62565 - 采用 SOT23 封装的 1.5A 降压转换器
- TPS60301 - 单节至 3.0V/3.3V、20mA 双路输出、高效充电泵
- TPL0401A-10 - 128 Taps Digital Potentiometer with I2C Interface in small SC-70 package
- TS3DV520 - 用于 DVI/DMI 应用领域的 5 通道差动 10:20 MUX 开关
- SN54ACT8997 - 具有 4 位识别总线的扫描路径连接器



