LM25037-Q1是TI公司的一款PWM与谐振控制器产品，LM25037-Q1是具有交流输出的双模 PWM 控制器，本页介绍了LM25037-Q1的产品说明、应用、特性等，并给出了与LM25037-Q1相关的TI元器件型号供参考。
LM25037-Q1 - 具有交流输出的双模 PWM 控制器 - PWM与谐振控制器 - 离线隔离型DC/DC控制器和转换器 - TI公司（Texas Instruments，德州仪器）
The LM25037 PWM controller contains all the features necessary to implement balanced double-ended power converter topologies, such as push-pull, half-bridge and full-bridge. These double-ended topologies allow for higher efficiencies and greater power densities compared to common single-ended topologies such as the flyback and forward. The LM25037 can be configured for either voltage mode or current mode control with minimum external components. Two alternating gate drive outputs are provided, each capable of 1.2A peak output current. The LM25037 can be configured to operate directly from the input voltage rail over an ultra-wide range of 5.5V to 75V. Additional features include programmable maximum duty cycle limit, line under-voltage lockout, cycle-by-cycle current limit and a hiccup mode fault protection with adjustable timeout delay, soft-start and a 2 MHz capable oscillator with synchronization capability, precision reference and thermal shutdown.
- LM25037-Q1 is an Automotive Grade Product that is AEC-Q100 Grade 1 Qualified (-40°C to 125°C Operating Junction Temperature)
- Ultra Wide Input Operating Range from 5.5V to 75V
- Alternating Outputs for Double-ended Topologies
- Current-mode or Feed-forward Voltage-mode Control
- Programmable Maximum Duty Cycle Limit
- 2.0% Feedback Reference Accuracy
- High Gain-bandwidth Error Amplifier
- Programmable Line Under-voltage Lockout (UVLO) with Adjustable Hysteresis
- Versatile Dual Mode Over-current Protection with Hiccup Delay Timer
- Programmable Soft-start
- Precision 5V Reference Output
- Current Sense Leading Edge Blanking
- Resistor Programmed 2 MHz Capable Oscillator
- Oscillator Synchronization Capability with Low Frequency Lockout Protection
Packages
- 16-Lead TSSOP
