LM8300 - 具有节电功能的四线电阻触摸屏控制器

LM8300是TI德州仪器公司的一款无产品，LM8300是具有节电功能的四线电阻触摸屏控制器，本站介绍了LM8300的封装应用图解、特点和优点、功能等，并给出了与LM8300相关的TI元器件型号供参考。

LM8300 - 具有节电功能的四线电阻触摸屏控制器 - 无 - 触摸屏控制器 - 德州仪器

产品描述

The LM8300/8500 is a 4-wire resistive touch screen controller. The controller samples and drives the touch screen without the need of any external hardware. The built in 10-bit A/D provides a maximum of 500 coordinate pairs per second (cpps). The data sampled from the touch screen is sent out on the UART at a speed of 38400 bps.

The controller has a power-saving mode which causes the controller to self-power down when no touch is detected on the touch screen for a specified amount of time. In the self-power down mode, the current drawn is typically less than 2 µA. The device resumes normal operation when a touch is detected on the touch screen or communication is detected on the UART. In addition to the self-power down mode, the controller can be disabled by pulling the SHUTDOWN pin low. The controller resumes normal operation when the SHUTDOWN pin is tristated or pulled high.

The controller has an internal non-volatile memory storage element to store configuration data such as calibration points or controller configurations.

产品特性

Supports 4 Wire Resistive Touch Panels
Low Power Standby Current Typically Less Than 2 µA at 5.5V
Maximum Speed of 500 Coordinate Pairs per Second
Automatic Wake Up and Return to Standby
10 bit A/D
On-chip Touch Screen Current Drivers - No External Driver Required
UART Interface
Controller Configurations are Stored in the Internal Non-volatile Storage Element
Touch Pressure can be Measured

下面可能是您感兴趣的TI德州仪器公司无元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购