LM95235-Q1 - 采用 TruTherm 技术且具有 SMBus 接口的汽车级 ±2°C 远程和本地温度传感器

LM95235-Q1是TI德州仪器公司的一款远程温度传感器产品，LM95235-Q1是采用 TruTherm 技术且具有 SMBus 接口的汽车级 ±2°C 远程和本地温度传感器，本站介绍了LM95235-Q1的封装应用图解、特点和优点、功能等，并给出了与LM95235-Q1相关的TI元器件型号供参考。

LM95235-Q1 - 采用 TruTherm 技术且具有 SMBus 接口的汽车级 ±2°C 远程和本地温度传感器 - 远程温度传感器 - 温度传感器和控制IC - 德州仪器

产品描述

The LM95235 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) interface and TruTherm technology that can monitor the temperature of a remote diode as well as its own temperature. The LM95235 can be used to very accurately monitor the temperature of external devices such as microprocessors, graphics processors, or a diode-connected MMBT3904 transistor. For automotive applications the LM95235Q is available that is AEC-Q100 Grade3 compliant and is manufactured on an Automotive Grade Flow. TruTherm BJT (transistor) beta compensation technology allows the LM95235 to precisely monitor thermal diodes found in 90 nm and smaller geometry processes. LM95235 reports temperature in two different formats for +127.875°C/-128°C range and 0°C/255°C range. The LM95235 T_CRIT and OS outputs are asserted when either unmasked channel exceeds its programmed limit and can be used to shutdown the system, to turn on the system fans, or as a microcontroller interrupt function. The current status of the T_CRIT and OS pins can be read back from the status registers via the SMBus interface. All limits have a shared programmable hysteresis register.

The remote temperature channel of the LM95235 has a programmable digital filter. The LM95235 contains a diode model selection bit to select between a typical Intel® processor on a 65 nm or 90 nm process or MMBT3904, as well as an offset register for maximum flexibility and best accuracy.

The LM95235 has a three-level address pin to connect up to 3 devices to the same SMBus master, that is shared with the OS output. The LM95235 has a programmable conversion rate register and a standby mode to save power. One conversion can be triggered in standby mode by writing to the one-shot register.

产品特性

Remote and Local Temperature Channels
TruTherm BJT Beta Compensation Technology
LM95235Q is AEC-Q100 Grade 3 Compliant and is Manufactured on an Automotive Grade Flow
Diode Model Selection Bit - MMBT3904 or 65/90-nm Processor Diodes
Two Formats: -128°C to 127.875°C and 0°C to 255.875°C
Digital Filter for Remote Channel
Programmable TCRIT and OS Thresholds
Programmable Shared Hysteresis Register
Diode Fault Detection
Mask, Offset, and Status Registers
SMBus 2.0 Compatible Interface, Supports TIMEOUT
Programmable Conversion Rate for Best Power Consumption
Three-Level Address Pin
Standby Mode One-Shot Conversion Control
Pin-for-Pin Compatible With the LM86 and LM89
8-Pin VSSOP Package

Key Specifications

Supply Voltage 3.0 to 3.6 V
Supply Current, Conv. Rate = 1 Hz 350 µA (typ)
Remote Diode Temperature Accuracy
- TA = 25°C to 85°C; TD = 60°C to 100°C, ±0.75 °C (max)
- TA = 25°C to 90°C; TD = 40°C to 125°C, ±1.5 °C (max)
Local Temperature Accuracy
- TA = 25°C to 100°C, ±2.0 °C (max)
Conversion Rate, Both Channels 16 to 0.4 Hz

下面可能是您感兴趣的TI德州仪器公司远程温度传感器元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购