LP3982是TI公司的一款单通道LDO产品，LP3982是微功耗、超低压降、低噪声 300mA CMOS 稳压器，本页介绍了LP3982的产品说明、应用、特性等，并给出了与LP3982相关的TI元器件型号供参考。
LP3982 - 微功耗、超低压降、低噪声 300mA CMOS 稳压器 - 单通道LDO - 线性稳压器(LDO) - TI公司（Texas Instruments，德州仪器）
- 2.5-V to 6-V Input Range
- MAX8860 Pin, Package, and Specification Compatible
- 300-mA Output Current
- 120-mV Typical Dropout at 300 mA
- 90-μA Typical Quiescent Current
- 1-nA Typical Shutdown Mode
- 60-dB Typical PSRR
- 120-μs Typical Turnon Time
- Stable with Small Ceramic Output Capacitors
- 37-μVRMS Output Voltage Noise (10 Hz to 100 kHz)
- Overtemperature/Overcurrent Protection
- ±2% Output Voltage Tolerance
- Wireless Handsets
- DSP Core Power
- Battery Powered Electronics
- Portable Information Appliances
The LP3982 low-dropout (LDO) CMOS linear regulator is available in 1.8-V, 2.5-V, 2.82-V, 3-V, 3.3-V, and adjustable versions. They deliver 300 mA of output current. Packaged in an 8-pin VSSOP, the LP3982 is pin- and package-compatible with Maxim's MAX8860. The LM3982 is also available in the small footprint WSON package.
The LP3982 suits battery-powered applications because of its shutdown mode (1 nA typical), low quiescent current (90 μA typical), and LDO voltage (120 mV typical). The low dropout voltage allows for more utilization of a battery’s available energy by operating closer to its end-of-life voltage. The LP3982 device's PMOS output transistor consumes relatively no drive current compared to PNP LDO regulators.
This PMOS regulator is stable with small ceramic capacitive loads (2.2 μF typical).
These devices also include regulation fault detection, a bandgap voltage reference, constant current limiting, and thermal-overload protection.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| LP3982 | WSON (8) | 2.50 mm × 3.00 mm |
| VSSOP (8) | 3.00 mm × 3.00 mm |
