• Embedded Microcontroller
  • 16-Bit RISC Architecture up to 16-MHz Clock
  • Wide Supply Voltage Range (1.8V to 3.6V) (1)
• Optimized Ultra-Low-Power Modes
  • Active Mode: Approximately 100 µA/MHz
  • Standby (LPM3 With VLO): 0.4 µA (Typical)
  • Real-Time Clock (RTC) (LPM3.5): 0.35µA(Typical) (2)
  • Shutdown (LPM4.5): 0.04 µA (Typical)
• Ultra-Low-Power Ferroelectric RAM (FRAM)
  • Up to 64KB of Nonvolatile Memory
  • Ultra-Low-Power Writes
  • Fast Write at 125ns per Word (64KB in 4ms)
  • Unified Memory = Program + Data + Storage in One Single Space
  • 1015 Write Cycle Endurance
  • Radiation Resistant and Nonmagnetic
• Intelligent Digital Peripherals
  • 32-Bit Hardware Multiplier (MPY)
  • Three-Channel Internal Direct Memory Access (DMA)
  • RTC With Calendar and Alarm Functions
  • Five 16-Bit Timers With up to Seven Capture/Compare Registers
  • 16-Bit and 32-Bit Cyclic Redundancy Checker (CRC16, CRC32)
• High-Performance Analog
  • Up to 8-Channel Analog Comparator
  • 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference and Sample-and-Hold and up to 8 External Input Channels
  • Integrated 116-Segment LCD Driver With Contrast Control
• Code Security and Encryption
  • 128-Bit or 256-Bit AES Security Encryption and Decryption Coprocessor (MSP430FR69xx(1) Only)
  • True Random Number Seed for Random Number Generation Algorithm
  • Lockable Memory Segments for IP Encapsulation and Secure Storage
• Multifunction Input/Output Ports
  • All I/O Pins Support Capacitive Touch Capability Without Need for External Components
  • Accessible Bit-, Byte- and Word-Wise (in Pairs)
  • Edge-Selectable Wakeup From LPM on Ports P1, P2, P3, and P4
  • Programmable Pullup and Pulldown on All Ports
• Enhanced Serial Communication
  • eUSCI_A0 and eUSCI_A1 Support:
    • UART With Automatic Baud-Rate Detection
    • IrDA Encode and Decode
    • SPI at Rates up to 10 Mbps
  • eUSCI_B0 and eUSCI_B1 Support:
    • I2C With Multiple-Slave Addressing
    • SPI at Rates up to 10Mbps
• Flexible Clock System
  • Fixed-Frequency DCO With 10 Selectable Factory-Trimmed Frequencies
  • Low-Power Low-Frequency Internal Clock Source (VLO)
  • 32-kHz Crystals (LFXT)
  • High-Frequency Crystals (HFXT)
• Development Tools and Software
  • Free Professional Development Environments With EnergyTrace++™ Technology for Power Profiling and Debugging
  • Microcontroller Development Boards Available
• Family Members
  • Section 3 Summarizes the Available Variants and Packages
• For Complete Module Descriptions, See the MSP430FR58xx, MSP430FR59xx, MSP430FR68xx, and MSP430FR69xx Family User's Guide (SLAU367)

(1) Minimum supply voltage is restricted by SVS levels.(2) The RTC is clocked by a 3.7-pF crystal.

• Heat Cost Allocators
• Utility Meters – Electricity, Water, and Gas
• Thermostats
• Portable Medical Equipment
• Sensor Management
• Weigh Scales

This ultra-low-power MSP430FRxx FRAM microcontroller family consists of several devices featuring embedded nonvolatile FRAM, a 16-bit CPU, and different sets of peripherals targeted for various applications. The architecture, FRAM, and peripherals, combined with seven low-power modes, are optimized to achieve extended battery life in portable and wireless sensing applications. FRAM is a new nonvolatile memory that combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash, all at lower total power consumption.

PART NUMBER	PACKAGE	BODY SIZE(2)
MSP430FR6972IPMR	LQFP (64)	10 mm × 10 mm
MSP430FR6972IRGC	VQFN (64)	9 mm × 9 mm
MSP430FR6922IG56	TSSOP (56)	6.1 mm × 14 mm

SN74CBT16233 - 16 位 2 选 1 FET 多路复用器/多路解复用器

TL7770-5 - 二路 Svs，5V 可编程，具有可编程时间延迟

TPS40190 - 低引脚数同步降压 DC/DC 控制器

CDC950 - PC 主板的差动时钟合成器/驱动器

CD74HC423 - 具有复位功能的高速 CMOS 逻辑双路可重触发单稳多频振荡器

TCA6507 - 具有强度控制和关断状态的低压 7 位 I2C 和 SMBus LED 驱动器

TPS65194 - 用于 LCD 电视和监视器的 13 通道电平转换器

CSD75207W15 - 双路 P 通道 NexFET? 功率 MOSFET，CSD75207W15

DRV777 - 7 位集成电机和中继驱动器

TPS25910 - 具有可编程浪涌压摆率的 3V 至 18V 高电流负载开关