TI,TI公司,TI代理商
TI(德州仪器)| TI产品型号搜索
专营TI元器件,强大的现货交付能力,解决您的采购难题
全流程提供TI现货供应链服务
当前位置:TI公司 > > TI芯片 >> PCA9544A
PCA9544A技术文档下载:
PCA9544A技术文档产品手册下载
PCA9544A - 产品图解:
PCA9544A-具有中断逻辑的 4 通道 I2C 和 SMBus 多路复用器
承诺原装正品
专营TI,真正优化您的供应链
TI产品 - PCA9544A介绍
PCA9544A - 具有中断逻辑的 4 通道 I2C 和 SMBus 多路复用器

PCA9544A是TI公司的一款I2C多路复用器、开关产品,PCA9544A是具有中断逻辑的 4 通道 I2C 和 SMBus 多路复用器,本页介绍了PCA9544A的产品说明、应用、特性等,并给出了与PCA9544A相关的TI元器件型号供参考。

PCA9544A - 具有中断逻辑的 4 通道 I2C 和 SMBus 多路复用器 - I2C多路复用器、开关 - I2C - TI公司(Texas Instruments,德州仪器)

产品描述

The PCA9544A is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. One SCL/SDA pair can be selected at a time, and this is determined by the contents of the programmable control register. Four interrupt inputs (INT3–INT0), one for each of the downstream pairs, are provided. One interrupt output (INT) acts as an AND of the four interrupt inputs.

A power-on reset function puts the registers in their default state and initializes the I2C state machine, with no channel selected.

The pass gates of the switches are constructed such that the VCC pin can be used to limit the maximum high voltage, which will be passed by the PCA9544A. This allows the use of different bus voltages on each pair, so that 1.8-V, 2.5-V, or 3.3-V parts can communicate with 5-V parts, without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 5-V tolerant.

For all available packages, see the orderable addendum at the end of the data sheet.

产品特性

  • 1-of-4 Bidirectional Translating Switches
  • I2C Bus and SMBus Compatible
  • Four Active-Low Interrupt Inputs
  • Active-Low Interrupt Output
  • Three Address Pins, Allowing up to Eight Devices on the I2C Bus
  • Channel Selection Via I2C Bus
  • Power Up With All Switch Channels Deselected
  • Low RON Switches
  • Allows Voltage-Level Translation Between 1.8-V, 2.5-V, 3.3-V, and 5-V Buses
  • No Glitch on Power Up
  • Supports Hot Insertion
  • Low Standby Current
  • Operating Power-Supply Voltage Range of 2.3Vto5.5V
  • 5.5-V Tolerant Inputs
  • 0 to 400-kHz Clock Frequency
  • Latch-Up Performance Exceeds 100 mA Per JESD 78
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)

下面可能是您感兴趣的TI公司I2C多路复用器、开关元器件
  • TLV7113025 - 采用 1.5mm X 1.5mm SON 封装的双路、200mA 输出、低噪声、高 PSRR、低压降稳压器
  • CD4098B-MIL - CMOS 双路单稳态多谐振荡器
  • TLC5921 - 16 通道 LED 驱动器
  • TPS65301-Q1 - 汽车 3MHz 降压稳压器、三路线性稳压器、和受保护传感器电源
  • SN75ALS176B - 差动总线收发器
  • LM335 - 模拟输出温度传感器,军用级,采用气密性 TO-92 封装
  • TMS320F28064 - Piccolo 微处理器
  • TPS3779 - 采用小型 μSON 封装的低功耗、双路电压检测器
  • TL2575-15 - 1A 简单降压开关稳压器
  • TL16C450 - 没有 FIFO 的单路 UART
  • 节约时间成本,提高采购效率,TI官网授权代理
    TI公司|TI德州仪器|德州仪器TI公司代理商|TI芯片代理商
    TI公司产品现货专家,订购TI公司产品不限最低起订量,TI产品大陆现货即时发货,香港库存3-5天发货,海外库存7-10天发货
    寻找全球TI代理商现货货源 - TI公司(德州仪器)电子元件在线订购