These high-speed monolithic counters consist of four d-c coupled, master-slave flip-flops, which are internally interconnected to provide either a divide-by-two and a divide-by-five counter (’196, ’LS196, ’S196) or a divide-by-two and a divide-by-eight counter (’197, ’LS197, ’S197). These four counters are fully programmable; that is, the outputs may be preset to any state by placing a low on the count/load input and entering the desired data at the data inputs. The outputs will change to agree with the data inputs independent of the state of the clocks.

During the count operation, transfer of information to the outputs occurs on the negative-going edge of the clock pulse. These counters feature a direct clear which when taken low sets all outputs low regardless of the states of the clocks.

These counters may also be used as 4-bit latches by using the count/load input as the strobe and entering data at the data inputs. The outputs will directly follow the data inputs when the count/load is low, but will remain unchanged when the count/load is high and the clock inputs are inactive.

All inputs are diode-clamped to minimize transmission-line effects and simplify system design. These circuits are compatible with most TTL logic families. Series 54, 54LS, and 54S circuits are characterized for operation over the full military temperature range of -55°C to 125°C; Series 74, 74LS, and 74S circuits are characterized for operation from 0°C to 70°C.

• Performs BCD, Bi-Quinary, or Binary Counting
• Fully Programmable
• Fully Independent Clear Input
• Input Clamping Diodes Simplify System Design
• Output QA Maintains Full Fan-out Capability In Addition to Driving Clock-2 Input

• TMP461 - 具有可编程地址的 1.8V 高精度远程温度传感器
• TL16C554 - 具有 16 字节 FIFO 的四路 UART
• UCC3802 - 低功耗 BiCMOS 电流模式 PWM
• UCC2808-1 - 低功耗电流模式推拉 PWM
• SN75176A - 差动总线收发器
• CD74ACT174 - 具有复位功能的六路 D 类触发器
• SN65C3243 - 3V 至 5.5V 多通道 RS-232 线路驱动器/接收器
• SN74CBTLV3383 - 低电压 10 位 FET 总线交换开关
• SN7432 - 四路 2 输入正或门
• AM5718 - AM571x ES1.0 DM [NDA]