TI,TI公司,TI代理商
TI(德州仪器)| TI产品型号搜索
专营TI元器件,强大的现货交付能力,解决您的采购难题
全流程提供TI现货供应链服务
当前位置:TI公司 > > TI芯片 >> SN54AC574
SN54AC574技术文档下载:
SN54AC574技术文档产品手册下载
SN54AC574 - 产品图解:
SN54AC574-具有三态输出的八路 D 类边沿触发器
承诺原装正品
专营TI,真正优化您的供应链
TI产品 - SN54AC574介绍
SN54AC574 - 具有三态输出的八路 D 类边沿触发器

SN54AC574是TI公司的一款D类触发器产品,SN54AC574是具有三态输出的八路 D 类边沿触发器,本页介绍了SN54AC574的产品说明、应用、特性等,并给出了与SN54AC574相关的TI元器件型号供参考。

SN54AC574 - 具有三态输出的八路 D 类边沿触发器 - D类触发器 - 触发器/锁存器/寄存器 - TI公司(Texas Instruments,德州仪器)

产品描述

These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The eight flip-flops of the ’AC574 devices are D-type edge-triggered flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs.

A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines in a bus-organized system without need for interface or pullup components.

OE\ does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

产品特性

  • 2-V to 6-V VCC Operation
  • Inputs Accept Voltages to 6 V
  • Max tpd of 8.5 ns at 5 V
  • 3-State Outputs Drive Bus Lines Directly

下面可能是您感兴趣的TI公司D类触发器元器件
  • DS90C363B - +3.3V 可编程 LVDS 发送器 18 位平板显示 (FPD) 链接 - 65MHz
  • TPA3112D1 - 具有 SpeakerGuard? 的 25W 单声道无滤波器 D 类音频放大器 (TPA3112)
  • UC1843A-EP - 增强型产品电流模式 Pwm 控制器
  • SN74LVC1G08 - 单路 2 输入正与门
  • TPS54361 - 具有软启动和 Eco-mode 的 4.5V 至 60 V 输入、5A、降压 DC-DC 转换器
  • PTH08000W - 具有自动跟踪功能的 2.25A 输出 5/12V 输入的非隔离宽调节模块
  • CLC007 - 具有双路补偿输出的串行数字电缆驱动器
  • SN54HC164-SP - 8 位并行输出串行移位寄存器
  • SN74AVC4T234 - 具有可配置电压转换的 4 位双电源总线收发器
  • CLC001 - 具有可调节输出的串行数字电缆驱动器
  • 节约时间成本,提高采购效率,TI官网授权代理
    TI公司|TI德州仪器|德州仪器TI公司代理商|TI芯片代理商
    TI公司产品现货专家,订购TI公司产品不限最低起订量,TI产品大陆现货即时发货,香港库存3-5天发货,海外库存7-10天发货
    寻找全球TI代理商现货货源 - TI公司(德州仪器)电子元件在线订购