The device is designed and qualified for use in automotive applications and meets or exceeds the specifications of the ISO 11898 High Speed CAN (Controller Area Network) Physical Layer standard (transceiver).

• Qualified for Automotive Applications
• Meets or Exceeds the Requirements of ISO11898-2 and ISO11898-5
• GIFT/ICT Compliant
• ESD Protection up to ±12kV (Human-Body Model) on Bus Pins
• I/O Voltage Level Adapting
  • SN65HVDA54x: Adaptable I/O Voltage Range (VIO) From 3V to 5.33V
  • SN65HVDA54x-5: 5 V VCC Device Version
• Operating Modes:
  • Normal Mode: All Devices
  • Low Power Standby Mode (VCC not required, only VIO Supply Needed Saving System Power)
    • SN65HVDA540: No Wake Up
    • SN65HVDA541: RXD Wake Up Request
  • Silent (Receive Only) Mode: SN65HVDA542
• High Electromagnetic Compliance (EMC)
• Protection
  • Undervoltage Protection on VIO and VCC
  • Bus-Fault Protection of 27V to 40V
  • TXD Dominant State Time Out
  • RXD Wake Up Request Lock Out on CAN Bus Stuck
  • Thermal Shutdown Protection
  • Power-Up/Down Glitch-Free Bus I/O
  • High Bus Input Impedance When Unpowered (No Bus Load)
• APPLICATIONS
  • SAE J2284 High-Speed CAN for Automotive Applications
  • SAE J1939 Standard Data Bus Interface
  • GMW3122 Dual-Wire CAN Physical Layer
  • ISO 11783 Standard Data Bus Interface
  • NMEA 2000 Standard Data Bus Interface

• LM5045 - 具有集成 MOSFET 驱动器的全桥接 PWM 控制器
• SN74ABT16501 - 具有三态输出的 18 位通用总线收发器
• MSP430FR5849 - Wolverine 混合信号微控制器
• TPS3836K33-Q1 - 具有 10ms/200ms 可选择延迟时间的汽车类 220nA 监控器
• TSB41BA3D - 支持 S400 和 1394b 物理层 (Phy)
• LMX2485Q-Q1 - 用于射频个人通信的汽车类 Δ-Σ 低功率双路 PLL
• SN74ALVC08 - 四路 2 输入正与门
• PCA9306-Q1 - 汽车类双通道双向 I2C 总线和 SMBus 电压电平转换器
• LM25116 - 42V 宽输入电压同步降压控制器
• LM27342 - 2A - 具有频率同步的宽输入范围降压稳压器