SN74ABTH32316 - 16 位三端口通用总线交换器

SN74ABTH32316是TI德州仪器公司的一款通用总线交换器(UBE)产品，SN74ABTH32316是16 位三端口通用总线交换器，本站介绍了SN74ABTH32316的封装应用图解、特点和优点、功能等，并给出了与SN74ABTH32316相关的TI元器件型号供参考。

SN74ABTH32316 - 16 位三端口通用总线交换器 - 通用总线交换器(UBE) - 通用总线功能 - 德州仪器

产品描述

The 'ABTH32316 consist of three 16-bit registered input/output (I/O) ports. These registers combine D-type latches and flip-flops to allow data flow in transparent, latch, and clock modes. Data from one input port can be exchanged to one or more of the other ports. Because of the universal storage element, multiple combinations of real-time and stored data can be exchanged among the three ports.

Data flow in each direction is controlled by the output-enable (OEA\, OEB\, and OEC\), select-control (SELA, SELB, and SELC), latch-enable (LEA, LEB, and LEC), and clock (CLKA, CLKB, and CLKC) inputs. The A data register operates in the transparent mode when LEA is high. When LEA is low, data is latched if CLKA is held at a high or low logic level. If LEA and clock-enable A (CLKENA\) are low, data is stored on the low-to-high transition of CLKA. Output data selection is accomplished by the select-control pins. All three ports have active-low output enables, so when the output-enable input is low, the outputs are active; when the output-enable input is high, the outputs are in the high-impedance state.

When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN54ABTH32316 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABTH32316 is characterized for operation from -40°C to 85°C.

产品特性

Members of the Texas Instruments Widebus+TM Family
State-of-the-Art EPIC-II BTM BiCMOS Design Significantly Reduces Power Dissipation
UBETM (Universal Bus Exchanger) Combines D-Type Latches and D-Type Flip-Flops for Operation in Transparent, Latched, Clocked, or Clock-Enabled Mode
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015
Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 5 V, TA = 25°C
High-Impedance State During Power Up and Power Down
Distributed VCC and GND Pin Configuration Minimizes High-Speed Switching Noise
High-Drive Outputs (-32-mA IOH, 64-mA IOL)
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Package Options Include 80-Pin Plastic Thin Quad Flat (PN) Package With 12 × 12-mm Body Using 0.5-mm Lead Pitch and 84-Pin Ceramic Quad Flat (HT) Package
Widebus+, EPIC-IIB, and UBE are trademarks of Texas Instruments Incorporated.

下面可能是您感兴趣的TI德州仪器公司通用总线交换器(UBE)元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购