The 'ALS193A are synchronous, reversible, 4-bit up/down binary counters. Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters.

The outputs of the four flip-flops are triggered on a low-to-high-level transition of either count/clock (UP or DOWN) input. The direction of the count is determined by which count input is pulsed while the other count input is high.

All four counters are fully programmable; that is, each output may be preset to either level by placing a low on the load () input and entering the desired data at the data inputs. The output changes to agree with the data inputs independently of the count pulses. This feature allows the counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs.

A high level applied to the clear (CLR) input forces all outputs to the low level. The clear function is independent of the count and i nputs. The UP, DOWN, and inputs are buffered to lower the drive requirement, which significantly reduces the loading on, or current required by, clock drivers, etc., for long parallel words.

These counters are designed to be cascaded without the need for external circuitry. The borrow () output produces a low-level pulse while the count is zero (all Q outputs low) and the DOWN input is low. Similarily, the carry (CO\) output produces a low-level pulse while the count is 9 or 15 (all Q outputs high) and the UP input is low. The counters can then be easily cascaded by feeding and to the count-down and count-up inputs, respectively, of the succeeding counter.

The SN54ALS193A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS193A is characterized for operation from 0°C to 70°C.

• Look-Ahead Circuitry Enhances Cascaded Counters
• Fully Synchronous in Count Modes
• Parallel Asynchronous Load for Modulo-N Count Lengths
• Asynchronous Clear
• Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs

• ADS62P19 - 具有 DDR LVDS 和并行 CMOS 输出的双通道 11 位、250/210 MSPS ADC
• TPD12S016 - 用于便携应用的超值 HDMI 配套芯片
• SN65LVCP22 - 2 x 2 交叉点交换器：LVDS 输出
• LP2997 - DDR-II 终止稳压器
• ADS8505 - 16 位 250kHz CMOS 模数转换器，具有串行接口和 2.5V 内部参考
• REF3225 - 采用 SOT23-6 封装的 2.5V 输出 4ppm/C 漂移 100uA 系列（带隙）电压参考
• CD74ACT161 - 具有异步复位的同步可预设的二进制计数器
• LMV431A - 低电压 (1.24V) 可调节精密并联稳压器
• CD74HCT4067-Q1 - 具有 TTL 输入的汽车类高速 CMOS 16 通道模拟多路复用器/多路解复用器
• LM3401 - 用于高功率 LED 驱动的滞后 PFET 控制器