SN74CB3T3253 - 双路 4 选 1 FET 多路复用器/多路解复用器，具有 5V 容限电平转换器的 2.5V/3.3V 低电压总线开关

SN74CB3T3253是TI德州仪器公司的一款数字多路复用器/多路解复用器产品，SN74CB3T3253是双路 4 选 1 FET 多路复用器/多路解复用器，具有 5V 容限电平转换器的 2.5V/3.3V 低电压总线开关，本站介绍了SN74CB3T3253的封装应用图解、特点和优点、功能等，并给出了与SN74CB3T3253相关的TI元器件型号供参考。

SN74CB3T3253 - 双路 4 选 1 FET 多路复用器/多路解复用器，具有 5V 容限电平转换器的 2.5V/3.3V 低电压总线开关 - 数字多路复用器/多路解复用器 - 多路复用器/多路解复用器(Mux/Demux) - 德州仪器

产品描述

The SN74CB3T3253 is a high-speed TTL-compatible FET multiplexer/demultiplexer with low ON-state resistance (ron), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks VCC. The SN74CB3T3253 supports systems using 5-V TTL, 3.3-V LVTTL, and 2.5-V CMOS switching standards, as well as user-defined switching levels (see Figure 1).

The SN74CB3T3253 is organized as two 1-of-4 multiplexer/demultiplexers with separate output-enable (1OE\, 2OE\) inputs. The select (S0, S1) inputs control the data path of each multiplexer/demultiplexer. When OE\ is low, the associated multiplexer/demultiplexer is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the associated multiplexer/demultiplexer is OFF, and a high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

产品特性

Output Voltage Translation Tracks VCC
Supports Mixed-Mode Signal Operation On All Data I/O Ports
- 5-V Input Down To 3.3-V Output Level Shift With 3.3-V VCC
- 5-V/3.3-V Input Down To 2.5-V Output Level Shift With 2.5-V VCC
5-V Tolerant I/Os With Device Powered-Up or Powered-Down
Bidirectional Data Flow, With Near-Zero Propagation Delay
Low ON-State Resistance (ron) Characteristics (ron = 5 Typical)
Low Input/Output Capacitance Minimizes Loading (Cio(OFF) = 5 pF Typical)
Data and Control Inputs Provide Undershoot Clamp Diodes
Low Power Consumption (ICC = 20 µA Max)
VCC Operating Range From 2.3 V to 3.6 V
Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs
Ioff Supports Partial-Power-Down Mode Operation
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
Supports Digital Applications: Level Translation, USB Interface, Memory Interleaving, Bus Isolation
Ideal for Low-Power Portable Equipment

下面可能是您感兴趣的TI德州仪器公司数字多路复用器/多路解复用器元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购