The ’HCT257 devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (OE)\ input is at the high logic level.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

• Operating Voltage Range of 4.5 V to 5.5 V
• High-Current 3-State Outputs Interface Directly With System Bus
• Typical tpd = 17 ns
• Low Power Consumption, 80-µA Max ICC
• ±6-mA Output Drive at 5 V
• Low Input Current of 1 µA Max
• Inputs Are TTL-Voltage Compatible
• Provide Bus Interface From Multiple Sources in High-Performance Systems
• Buffered Inputs and Outputs

• ADS7958 - 8 位、1 MSPS、4 通道、单端、SAR ADC
• SN54ALS38B - 具有集电极开路输出的四路 2 输入正与非缓冲器
• ADS5407 - 低功耗 12 位 500MSPS 双路模数转换器
• TS3L100 - 具有低导通电阻的四路 SPDT 宽带网络开关
• CDCEL913-Q1 - 具有 1.8V LVCMOS 输出的汽车类可编程 1-PLL VCXO 时钟合成器
• INA200 - High-Side Measurement Current-ShuntMonitor with Comparator and Reference
• DS92LV3241 - 20-85 MHz 32 位频道链接 II 串行器
• SN7497 - 同步 6 位二进制比率乘法器
• UCC28019 - 8 引脚持续传导模式 (CCM) PFC 控制器
• TPS3823-25 - 带有看门狗输入和手动复位功能的电源电压监控器