• DisplayPort™ Physical Layer Input Port to TMDS Physical Layer Output Port Supporting up to 6-Gbps Data Rates
• Support DisplayPort Dual-Mode Standard Version 1.1
• Support HDMI2.0a Transmitter Electrical Parameters up to 6-Gbps
• Supports Type 2 I2C-over-AUX to DDC Bridge
• Integrated TMDS Level Translator and CDR
• Adaptive Receiver Equalizer and Programmable Fixed Equalizer
• Selectable De-Emphasis
• Low Power Typical Consumption
  • 435 mW at 6-Gbps Retimer
  • 10 mW at Shutdown State
• Integrated DVI and HDMI Identification Recognition Dual Mode DP Type 2 Capability
• Active I2C[4] Buffer
• Input Swap on Main Lanes
• I2C[4] and Pin-Strap Programmable
• Industrial Temperature Range: –40 to 85°C (SN65DP159)
• Extended Commercial Temperature Range: 0 to 85°C (SN75DP159)
• 40-Pin 0.4-mm Pitch, 5-mm × 5-mm WQFN
• 48-Pin 0.5-mm Pitch, 7-mm × 7-mm VQFN

• Personal Computer Market
• Next Generation Adaptor Dongles
• Desktop PC
• Notebook PC Market
• Docking Station
• HDTV
• Standalone Video Card
• Tablet

The SNx5DP159 device is a dual mode[1] DisplayPort to transition-minimized differential signal (TMDS) retimer supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4band 2.0output signals. The SNx5DP159 device supports the dual mode standard version 1.1 type 1 and type 2 through the DDC link or AUX channel. The SNx5DP159 device supports data rate up to 6 Gbps per data lane to support Ultra HD (4K × 2K / 60 Hz) 8-bits per color high-resolution video and HDTV with 16-bit color depth at 1080p (1920 × 1080 / 60 Hz). The SNx5DP159 device can automatically configure itself as a re-driver at data rates <1 Gbps, or as a retimer at more than this data rate. This feature can be turned off through I2C[4] programming.

For signal integrity, the SNx5DP159 device implements several features. The SNx5DP159 receiver supports both adaptive and fixed equalization to clean up inter-symbol interference (ISI) jitter or loss from the bandwidth-limited board traces or cables. When working as a retimer, the embedded clock data recovery (CDR) cleans up the input high frequency and random jitter from video source. The transmitter provides several features for passing compliance and reducing system-level design issues like de-emphasis, which compensates for the attenuation when driving long cables or high-loss board traces. The SNx5DP159 device also includes TMDS output amplitude adjust using an external resistor on the Vsadj pin, source termination selection, and output slew rate control. Device operation and configuration can be programmed by pin strapping or I2C[4].

The SNx5DP159 device implements several methods for power management and active power reduction.