TIBPAL22V10-20M - 高性能影响 X 可编程阵列逻辑电路

TIBPAL22V10-20M是TI德州仪器公司的一款可编程逻辑产品，TIBPAL22V10-20M是高性能影响 X 可编程阵列逻辑电路，本站介绍了TIBPAL22V10-20M的封装应用图解、特点和优点、功能等，并给出了与TIBPAL22V10-20M相关的TI元器件型号供参考。

TIBPAL22V10-20M - 高性能影响 X 可编程阵列逻辑电路 - 可编程逻辑 - 特殊逻辑 - 德州仪器

产品描述

The TIBPAL22V10-20M is a programmable array logic device featuring high speed and functional equivalency when compared to presently available devices. They are implemented with the familiar sum-of-products (AND-OR) logic structure featuring the new concept "Programmable Output Logic Macrocell". These IMPACT-X™ circuits combine the latest Advanced Low-Power Schottky technology with proven titaniumtungsten fuses to provide reliable, high-performance substitutes for conventional TTL logic.

These devices contain up to 22 inputs and 10 outputs. They incorporate the unique capability of defining and programming the architecture of each output on an individual basis. Outputs may be registered or nonregistered and inverting or noninverting as shown in the output logic macrocell diagram. The ten potential outputs are enabled through the use of individual product terms.

Further advantages can be seen in the introduction of variable product term distribution. This technique allocates from 8 to 16 logical product terms to each output for an average of 12 product terms per output. This variable allocation of terms allows far more complex functions to be implemented than in previously available devices.

Circuit design is enhanced by the addition of a synchronous set and an asynchronous reset product term. These functions are common to all registers. When the synchronous set product term is a logic 1, the output registers are loaded with a logic 1 on the next low-to-high clock transition. When the asynchronous reset product term is a logic 1, the output registers are loaded with a logic 0. The output logic level after set or reset depends on the polarity selected during programming. Output registers can be preloaded to any desired state during testing. Preloading permits full logical verification during product testing.

With features such as programmable output logic macrocells and variable product term distribution, the TIBPAL22V10-20M offers quick design and development of custom LSI functions with complexities of 500 to 800 equivalent gates. Since each of the ten output pins may be individually configured as inputs on either a temporary or permanent basis, functions requiring up to 21 inputs and a single output or down to 12 inputs and 10 outputs are possible.

A power-up clear function is supplied that forces all registered outputs to a predetermined state after power is applied to the device. Registered outputs selected as active-low power up with their outputs high. Registered outputs selected as active-high power up with their outputs low.

A single security fuse is provided on each device to discourage unauthorized copying of fuse patterns. Once blown, the verification circuitry is disabled and all other fuses will appear to be open.

The TIBPAL22V10-20M is characterized for operation over the full military temperature range of –55°C to 125°C.

产品特性

Second-Generation PLD Architecture
High-Performance Operation:
- fmax (External Feedback) . . . 33.3 MHz
- Propagation Delay . . . 20 ns Max
Increased Logic Power - Up to 22 Inputs and 10 Outputs
Increased Product Terms - Average of 12 per Output
Variable Product Term Distribution Allows More Complex Functions to Be Implemented
Each Output Is User Programmable for Registered or Combinational Operation, Polarity, and Output Enable Control
Power-Up Clear on Registered Outputs
TTL-Level Preload for Improved Testability
Extra Terms Provide Logical Synchronous Set and Asynchronous Reset Capability
Fast Programming, High Programming Yield, and Unsurpassed Reliability Ensured Using Ti-W Fuses
AC and DC Testing Done at the Factory Utilizing Special Designed-In Test Features
Dependable Texas Instruments Quality and Reliability
Package Options Include Plastic Dual-In-Line and Chip Carrier Packages

IMPACT-X is a trademark of Texas Instruments Incorporated.

下面可能是您感兴趣的TI德州仪器公司可编程逻辑元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购