TPA731是TI公司的一款扬声器放大器（AB类/D类）产品，TPA731是具有工作态高电平关断状态的单声道、差动输入、AB 类音频放大器，本页介绍了TPA731的产品说明、应用、特性等，并给出了与TPA731相关的TI元器件型号供参考。
TPA731 - 具有工作态高电平关断状态的单声道、差动输入、AB 类音频放大器 - 扬声器放大器（AB类/D类） - 低功耗放大器 - TI公司（Texas Instruments，德州仪器）
The TPA731 is a bridge-tied load (BTL) audio power amplifier developed especially for low-voltage applications where internal speakers are required. Operating with a 3.3-V supply, the TPA731 can deliver 250-mW of continuous power into a BTL 8- load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. This device features a shutdown mode for power-sensitive applications with a supply current of 1.5 nA during shutdown. The TPA731 is available in an 8-pin SOIC surface-mount package and the surface-mount PowerPAD™ MSOP, which reduces board space by 50% and height by 40%.
- Fully Specified for 3.3-V and 5-V Operation
- Wide Power Supply Compatibility 2.5 V – 5.5 V
- Output Power for RL = 8
- 700 mW at VDD = 5 V
- 250 mW at VDD = 3.3 V
- Ultralow Supply Current in Shutdown Mode . . . 1.5 nA
- Thermal and Short-Circuit Protection
- Surface-Mount Packaging
- SOIC
- PowerPAD™ MSOP
PowerPAD is a trademark of Texas Instruments.
