• Qualified for Automotive Applications
• Power-On Reset Generator With Adjustable Delay Time: 1.25ms to 10s
• Very Low Quiescent Current: 2.4μA Typical
• High Threshold Accuracy: 0.5% Typical
• Fixed Threshold Voltages for Standard Voltage Rails From 1.2V to 5V and Adjustable Voltage Down to 0.4V Are Available
• Manual Reset (MR) Input
• Open-Drain RESET Output
• Temperature Range: –40°C to 125°C
• Small SOT-23 Package

• DSP or Microcontroller Applications
• FPGA and ASIC Applications
• Automotive Vision
• Automotive Radar

The TPS3808Gxx-Q1 microprocessor supervisory circuits monitor system voltages from 0.4V to 5V, asserting an open-drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. The RESET output remains low for the user-adjustable delay time after the SENSE voltage and MR return above their thresholds.

The TPS3808Gxx-Q1 device uses a precision reference to achieve 0.5% threshold accuracy for VIT ≤ 3.3 V. The reset delay time can be set to 20ms by disconnecting the CT pin, 300ms by connecting the CT pin to VDD using a resistor, or can be user-adjusted from 1.25ms to 10s by connecting the CT pin to an external capacitor. The TPS3808Gxx-Q1 has a very low typical quiescent current of 2.4μA, so it is well suited for battery-powered applications. The device is available in a small SOT-23 package and is fully specified over a temperature range of –40°C to 125°C (TJ).

For more information about TI's voltage supervisor portfolio, visit the Supervisor and Reset IC Overview Page page.