The PTH08000W is a highly integrated, low-cost switching regulator module that delivers up to 2.25 A of output current. The PTH08000W sources output current at a much higher efficiency than a TO-220 linear regulator IC, eliminating the need for a heatsink. The small size (0.75 inch × 0.5 inch) and flexible operation creates value for a variety of applications.

The input voltage range of the PTH08000W is 4.5 V to 14 V, allowing operation from either a 5-V or 12-V input bus. Using state-of-the-art switched-mode power-conversion technology, the PTH08000W can step down to voltages as low as 0.9 V from a 5-V input bus, with less than 1 W of power dissipation. The output voltage can be adjusted to any voltage over the range, 0.9 V to 5.5 V, using a single external resistor. This series includes Auto-Track™ sequencing. This feature simplifies the task of supply voltage sequencing in a power system by enabling modules to track each other, or any external voltage, during power up and power down. Operating features include an undervoltage lockout (UVLO), on/off inhibit, overcurrent protection, and overtemperature protection. Target applications include telecommunications, test and measurement applications, and high-end consumer products. This product is available in both through-hole and surface-mount package options, including tape and reel. The PTH08000W is compatible with TI's roadmap for RoHS and lead-free compliance.

• Up to 2.25-A OutputCurrent at 85°C
• 4.5-V to 14-V Input Voltage Range
• Wide-Output Voltage Adjust (0.9 V to 5.5 V)
• Efficiencies Up to 94%
• On/Off Inhibit
• Undervoltage Lockout (UVLO)
• Output Overcurrent Protection (Nonlatching, Auto-Reset)
• Overtemperature Protection
• Ambient Temperature Range: -40°C to 85°C
• Surface-Mount Package
• Safety Agency Approvals: UL/CUL 60950, EN60950
• APPLICATIONS
  • Telecommunications, Instrumentation, and General-Purpose Circuits

Auto-Track, POLA, TMS320 are trademarks of Texas Instruments.