TPS60130 - 稳压 5V 高功率充电泵 DC/DC 转换器

TPS60130是TI德州仪器公司的一款电荷泵（无感应器）产品，TPS60130是稳压 5V 高功率充电泵 DC/DC 转换器，本站介绍了TPS60130的封装应用图解、特点和优点、功能等，并给出了与TPS60130相关的TI元器件型号供参考。

TPS60130 - 稳压 5V 高功率充电泵 DC/DC 转换器 - 电荷泵（无感应器） - DC/DC开关稳压器 - 德州仪器

产品描述

The TPS6013x step-up, regulated charge pumps generate a 5-V ±4%output voltage from a 2.7-V to 5.4-V input voltage (three alkaline, NiCd, or NiMH batteries or one Lithium or Lilon battery). The output current is 300 mA for the TPS60130/ TPS60131 and 150 mA for the TPS60132/ TPS60133, all from a 3-V input. Only four external capacitors are needed to build a complete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5x or doubler conversion mode. From a 3-V input, all ICs can start with full load current.

The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60130 and TPS60132 include a low-battery comparator; TPS60131 and TPS60133 feature a power-good output. The logic shut-down function reduces the supply current to 1 uA (max) and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during startup. This dc/dc converter requires no inductors and therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin PowerPADTM package (PWP).

产品特性

Up to 90% Efficiency From 2.7-V to 5.4-V Input Voltage Range Because of Special Switching Topology
Up to 300-mA Output Current (TPS60130 and TPS60131)
No Inductors Required, Low EMI
Regulated 5-V ±4% Output
Only Four External Components Required
60-uA Quiescent Supply Current
0.05-uA Shutdown Current
Load Disconnected in Shutdown
Space-Saving, Thermally-Enhanced PowerPADTM Package
Evaluation Module Available (TPS60130EVM-143)

下面可能是您感兴趣的TI德州仪器公司电荷泵（无感应器）元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购