


- LP2988AIMX-2.5 - 电源管理IC - 稳压器 - 线性
- SN74ACT244DWE4 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LM2936MPX-5.0/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LP2987IMM-2.8 - 电源管理IC - 稳压器 - 线性
- LM12H458CIV/NOPB - 集成电路(IC) > 数据采集 > ADC/DAC - 特殊用途
- LP38788SDX-ADJ/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TPS62737EVM-560 - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- CY74FCT541ATSOCT - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TLC27L7IP - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- CD74HCT283MG4 - 逻辑 - 专用逻辑
- TL432IDBZR - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- LM4981SQX/NOPB - 线性 - 放大器 - 音频
- MSP430F5528IRGC - 集成电路(IC) > 嵌入式 > 微控制器
- TLV75507PDQNR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN74AHC158DGVRE4 - 逻辑 - 信号开关,多路复用器,解码器
- SN74ALS580BNS - 集成电路(IC) > 逻辑 > 锁存器
- LF444ACN - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- OPA128JM - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TS5A4594DCKR - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- TLV320DAC26IRHBRG4 - 集成电路(IC) > 数据采集 > ADC/DAC - 特殊用途



UCC28019A - 8 引脚持续传导模式 (CCM) PFC 控制器
UCC28019A是TI德州仪器公司的一款功率因数校正产品,UCC28019A是8 引脚持续传导模式 (CCM) PFC 控制器,本站介绍了UCC28019A的封装应用图解、特点和优点、功能等,并给出了与UCC28019A相关的TI元器件型号供参考。
UCC28019A - 8 引脚持续传导模式 (CCM) PFC 控制器 - 功率因数校正 - 离线隔离型DC/DC控制器和转换器 - 德州仪器
- 8-Pin Solution Reduces External Components
- Wide-Range Universal AC Input Voltage
- Fixed 65-kHz Operating Frequency
- Maximum Duty Cycle of 98% (typ.)
- Output Over/Undervoltage Protection
- Input Brown-Out Protection
- Cycle-by-Cycle Peak Current Limiting
- Open Loop Detection
- Low-Power User-Controlled Standby Mode
- CCM Boost Power Factor Correction Power Converters in the 100 W to >2 kW Range
- Digital TV
- Home Electronics
- White Goods and Industrial Electronics
- Server and Desktop Power Supplies
The UCC28019A 8-pin active Power Factor Correction (PFC) controller uses the boost topology operating in Continuous Conduction Mode (CCM). The controller is suitable for systems in the 100 W to >2 kW range over a wide-range universal ac line input. Start-up current during undervoltage lockout is less than 200 μA. The user can control low power standby mode by pulling the VSENSE pin below 0.77V.
Low-distortion wave shaping of the input current using average current mode control is achieved without input line sensing, reducing the external component count. Simple external networks allow for flexible compensation of the current and voltage control loops. The switching frequency is internally fixed and trimmed to better than ±5% accuracy at 25°C. Fast 1.5-A peak gate current drives the external switch.
Numerous system-level protection features include peak current limit, soft over-current, open-loop detection, input brown-out, and output over/undervoltage. Soft-start limits boost current during start-up. A trimmed internal reference provides accurate protection thresholds and a regulation set-point. An internal clamp limits the gate drive voltage to 12.5 V.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| UCC28019A | SOIC (8) | 3.91 mm × 4.9 mm |
| PDIP (8) | 6.35 mm × 9.81 mm |
- THS1207 - 12 位,6MSPS 同步采样四通道 ADC;包括并行 DSP/uP I/F 通道自动扫描
- SN5438 - 具有开集输出的四路 2 输入正与非缓冲器
- TCA4311A - 可热插拔双线总线缓冲器
- TS5N214 - 2 位 4 选 1 FET 多路复用器/多路解复用器高带宽总线开关
- TPS3808G12-Q1 - 汽车类低静态电流可编程延迟监控电路
- UC2823A - 高速 PWM 控制器
- LM10503 - Triple Buck Convertor Energy Management Unit
- TPS2511-Q1 - 汽车类 USB 专用充电端口控制器和限流电源开关
- SN65HVD07 - 高输出 RS-485 收发器
- MSP430FE4252 - 用于能量计的 16 位超低功耗微控制器,具有 16KB 闪存和 512B RAM



