UCC2912 - 可编程热插拔开关电源管理器

UCC2912是TI德州仪器公司的一款eFuses（集成FET）产品，UCC2912是可编程热插拔开关电源管理器，本站介绍了UCC2912的封装应用图解、特点和优点、功能等，并给出了与UCC2912相关的TI元器件型号供参考。

UCC2912 - 可编程热插拔开关电源管理器 - eFuses（集成FET） - 保护、监控和热插拔 - 德州仪器

产品描述

The UCC3912 family of hot swap power managers provides complete power management, hot swap capability, and circuit breaker functions. The only component required to operate the device, other than supply bypassing, is the fault timing capacitor, CT. All control and housekeeping functions are integrated, and externally programmable. These include the fault current level, maximum output-sourcing current, maximum fault time, and startup delay. In the event of a constant fault, the internal fixed 3% duty cycle ratio limits average output power.

The internal 4-bit DAC allows programming of the fault level current from 0 A to 3 A with 0.25-A resolution. The IMAX control pin sets the maximum sourcing current to 1 A above the fault level when driven low, and to a full 4 A when driven high for applications which require fast output capacitor charging.

When the output current is below the fault level, the output MOSFET is switched on with a nominal on resistance of 0.15 . When the output current exceeds the fault level, but is less than the maximum sourcing level, the output remains switched on, but the fault timer starts charging CT. Once CT charges to a preset threshold, the switch is turned off, and remains off for 30 times the programmed fault time. When the output current reaches the maximum sourcing level, the MOSFET transitions from a switch to a constant current source.

The UCC3912 family is designed for unidirectional current flow, emulating an ideal diode in series with the power switch. This feature is particularly attractive in applications where many devices are powering a common bus, such as with SCSI Termpwr.

The UCC3912 family can be put into sleep mode drawing only 1-µA of supply current. The SHTDWN\ pin has a preset threshold hysteresis which allows the user the ability to set a time delay upon startup to achieve sequencing of power. Other features include an open drain FAULT\ output indicator, thermal shutdown, under voltage lockout, and a low thermal resistance small outline package.

产品特性

Integrated 0.15- Power MOSFET
3-V to 8-V Operation
Digital Programmable Current Limit from 0 A to 3 A
Electronic Circuit Breaker Function
1µA ICC When Disabled
Programmable On-Time
Programmable Start Delay
Fixed 3% Duty Cycle
Unidirectional Switch
Thermal Shutdown
Fault-Output Indicator
Maximum-Output Current Can Be Set to 1 A Above the Programmed Fault Level or to a Full 4 A
Power SOIC, Low-Thermal Resistance Packaging

下面可能是您感兴趣的TI德州仪器公司eFuses（集成FET）元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购