

- 74ACT11257DWR - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- LM7301IM5X/SL110603 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TMP007AIYZFR - 传感器,变送器 > 温度传感器 > 模拟和数字输出
- TLV5627CDR - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- XTR116UA/2K5G4 - 集成电路(IC) > 接口 > 传感器和检测器接口
- OPA2810DGKEVM - 开发板,套件,编程器 > 评估板 > 运算放大器评估板
- TS3A5018RSVR - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- TS12A4516D - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- TLC27M7IPG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LMK3C0105V18RERR - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- TPS26635RGER - 集成电路(IC) > 电源管理(PMIC) > 电流调节/管理
- LM629MX-8 - 集成电路(IC) > 电源管理(PMIC) > 电机驱动器,控制器
- LMC7225IM5/NOPB - 集成电路(IC) > 线性 > 比较器
- TPS7H4011EVM - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- TL081HIDBVR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN72252N - 集成电路(IC) > 逻辑 > 门和反相器
- CD74HCT4067IM96Q1 - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- M0G3507QDGS32RQ1 - 集成电路(IC) > 嵌入式 > 微控制器
- UCC3946N - 集成电路(IC) > 电源管理(PMIC) > 监控器
- LP8862Q1EVM - 开发板,套件,编程器 > 评估板 > LED 驱动器评估板



UCC39411 - 低功耗同步升压转换器
UCC39411是TI德州仪器公司的一款转换器(集成开关)产品,UCC39411是低功耗同步升压转换器,本站介绍了UCC39411的封装应用图解、特点和优点、功能等,并给出了与UCC39411相关的TI元器件型号供参考。
UCC39411 - 低功耗同步升压转换器 - 转换器(集成开关) - DC/DC开关稳压器 - 德州仪器
The UCCx9411 family of low-input voltage, single-inductor-boost converters is optimized to operate from a single or dual alkaline cell, and steps up to a 3.3 V, 5 V, or adjustable output at 200 mW. The UCCx9411 family also provides an auxiliary 7 V output, primarily for the gate-drive supply, which can be used for applications requiring an auxiliary output, such as 5 V, by linear regulating. The primary output starts up under full load at input voltages typically as low as 0.8 V with a ensured max of 1 V, and operates down to 0.5 V once the converter is operating, thereby maximizing battery usage.
The UCCx9411 family is designed to accommodate demanding applications such as pagers and cell phones that require high efficiency over a wide operating range of several milliwatts to a couple of hundred milli-watts. High efficiency at low output current is achieved by optimizing switching and conduction losses with a low total quiescent current. At higher output current, the 0.5 synchronous rectifier along with continuous mode conduction provide high power efficiency. The wide input voltage range of the UCCx9411 family can accommodate other power sources such as NiCd and NiMH.
The UCCx9411 family also provides shutdown control. Packages available are the 8-pin SOIC (D) and 8-pin TSSOP (PW) to optimize board space.
- 1 V Input Voltage Operation Start-Up Ensured Under Full Load on Main Output, and Operation Down to 0.5 V
- 200 mW Output Power at Battery Voltages as Low as 0.8 V
- Secondary 7 V Supply from a Single Inductor
- Output Fully Disconnected in Shutdown
- Adaptive Current Mode Control for Optimum Efficiency
- High Efficiency Over Wide Operating Range
- 6 µA Shutdown Supply Current
- Output Reset Function with Programmable Reset Period
- SN65LVDS94 - Serdes(串行器/解串器)接收器
- ADS62P44 - 具有可选 DDR LVDS 或 CMOS 输出的双路 14 位 105MSPS ADC
- CDCV304 - 通用和 PCI-X 1:4 时钟缓冲器
- TS3L110 - 四路 SPDT 宽频带 10/100 Base-T 局域网开关差动 8 到 4 多路复用器/多路解复用器
- CD4070B-MIL - CMOS 四路异或门
- CD54HCT251 - 具有三态输出的高速 CMOS 逻辑 8 输入多路复用器
- ADC128S102QML-SP - 8-Channel, 50 kSPS to 1 MSPS, 12-Bit A/D Converter
- SN74LVC1G97-Q1 - 汽车类可配置多功能门
- ADS5481 - 具有缓冲模拟输入的 16 位 80MSPS ADC
- LM43601 - 3.5 36V 500mA、1A 低静态电流降压转换器



