

- SN74ALS857NT - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- TLV7A0330PDBVR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN65LVP17EVM - 评估和演示板及套件
- V62/03602-01XE - 集成电路(IC) > 逻辑 > 锁存器
- TPS2550DBVEVM-271 - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- PCA9554PW - 集成电路(IC) > 接口 > I/O 扩展器
- LMV715IDCKR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TAS5026PAG - 集成电路(IC) > 音频专用
- CC2564MODNEM - 开发板,套件,编程器 > 评估板 > 射频评估和开发套件,板
- BQ2084RTTT-V140 - 电源管理IC - 电池管理
- SN74AHCT245PW - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TL1963A-15DCYT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- OPA1678IDGKT - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74LV123ARGYRG4 - 集成电路(IC) > 逻辑 > 多谐振荡器
- SN74LVC1G16DCKRQ1 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- UCC2809DTR-1 - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- SN74ALVC164245DL - 集成电路(IC) > 逻辑 > 转换器,电平移位器
- TPS62616YFDT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LM5002MAX/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LP5900SD-1.8 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性



ADCS7476 - 采用 SOT-23 和 LLP 封装的 1MSPS、12-/10-/8 位 A/D 转换器
ADCS7476是TI德州仪器公司的一款精密ADC(<=10MSPS)产品,ADCS7476是采用 SOT-23 和 LLP 封装的 1MSPS、12-/10-/8 位 A/D 转换器,本站介绍了ADCS7476的封装应用图解、特点和优点、功能等,并给出了与ADCS7476相关的TI元器件型号供参考。
ADCS7476 - 采用 SOT-23 和 LLP 封装的 1MSPS、12-/10-/8 位 A/D 转换器 - 精密ADC(<=10MSPS) - 模数转换器 - 德州仪器
The ADCS7476, ADCS7477, and ADCS7478 are low power, monolithic CMOS 12-, 10- and 8-bit analog-to-digital converters that operate at 1 MSPS. The ADCS7476/77/78 are drop-in replacements for Analog Devices' AD7476/77/78. Each device is based on a successive approximation register architecture with internal track-and-hold. The serial interface is compatible with several standards, such as SPI™, QSPI™, MICROWIRE™, and many common DSP serial interfaces.
The ADCS7476/77/78 uses the supply voltage as a reference, enabling the devices to operate with a full-scale input range of 0 to VDD. The conversion rate is determined from the serial clock (SCLK) speed. These converters offer a shutdown mode, which can be used to trade throughput for power consumption. The ADCS7476/77/78 is operated with a single supply that can range from +2.7V to +5.25V. Normal power consumption during continuous conversion, using a +3V or +5V supply, is 2 mW or 10 mW respectively. The power down feature, which is enabled by a chip select (CS) pin, reduces the power consumption to under 5 µW using a +5V supply. All three converters are available in a 6-lead, SOT-23 package and in a 6-lead WSON, both of which provide an extremely small footprint for applications where space is a critical consideration. These products are designed for operation over the automotive/extended industrial temperature range of −40°C to +125°C.
- Variable Power Management
- Packaged in 6-Lead, SOT-23 and WSON
- Power Supply used as Reference
- Single +2.7V to +5.25V Supply Operation
- SPI™/QSPI™/MICROWIRE™/DSP Compatible
Key Specifications
- Resolution with no Missing Codes 12/10/8 bits
- Conversion Rate 1 MSPS
- DNL +0.5, -0.3 LSB (typ)
- INL ± 0.4 LSB (typ)
- Power Consumption
- 3V Supply 2 mW (typ)
- 5V Supply 10 mW (typ)
- CSD87330Q3D - 30V 同步降压 NexFET? 电源块
- SN74ALVCH16820 - 具有双路输出和三态输出的 3.3V 10 位触发器
- SN74LV393A-EP - 增强型产品双路 4 位二进制计数器
- ADS7223 - 12 位 1MSPS 4x2/2x2 同步采样 SAR ADC
- BQ25012 - 单片锂离子充电器和 DC/DC 转换器 IC,输出 1.8V
- SN74ALVCH16270 - 具有三态输出的 12 位到 24 位寄存总线交换器
- TPS63060-EP - 具有 2A 开关电流的高输入电压降压-升压转换器
- TPS62693 - 800mA、3MHz 高效降压转换器,TPS6269x
- SN74CBT3125C - 具有 -2V 下冲保护的四路 FET 总线开关
- SN65ELT22 - 5V 双路 TTL 至差动 PECL 转换器



