

- LMP7709MAX/NOPB - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- INA2191A3IYBJR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- CD74HC85PWE4 - 集成电路(IC) > 逻辑 > 比较器
- TLV70033DDCT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TLV3012BQDCKRQ1 - 集成电路(IC) > 线性 > 比较器
- SN74LVCU04APWT - 集成电路(IC) > 逻辑 > 门和反相器
- ADS8321E/250 - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MCT8314Z0HRRWR - 集成电路(IC) > 电源管理(PMIC) > 电机驱动器,控制器
- CD74HCT4053M96 - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- LP5951MF-1.5/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SCAN921260UJB - 集成电路(IC) > 接口 > 串行器,解串器
- LM27965SQX/NOPB - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- MSP430FR2675TRHAR - 集成电路(IC) > 嵌入式 > 微控制器
- ADS4122IRGZT - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- SN74LS191DE4 - 集成电路(IC) > 逻辑 > 计数器,除法器
- SN74AHCT126NSR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- OMAP3503DCBB - 集成电路(IC) > 嵌入式 > 微处理器
- LMZ10500SILR - 板安装电源 > 直流转换器
- LAUNCHXL-F28379D - 开发板,套件,编程器 > 评估板 > 嵌入式 MCU、DSP 评估板
- TLV61220ADBVR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器



ADCS7478 - 采用 SOT-23 和 LLP 封装的 1MSPS、12-/10-/8 位 A/D 转换器
ADCS7478是TI德州仪器公司的一款精密ADC(<=10MSPS)产品,ADCS7478是采用 SOT-23 和 LLP 封装的 1MSPS、12-/10-/8 位 A/D 转换器,本站介绍了ADCS7478的封装应用图解、特点和优点、功能等,并给出了与ADCS7478相关的TI元器件型号供参考。
ADCS7478 - 采用 SOT-23 和 LLP 封装的 1MSPS、12-/10-/8 位 A/D 转换器 - 精密ADC(<=10MSPS) - 模数转换器 - 德州仪器
The ADCS7476, ADCS7477, and ADCS7478 are low power, monolithic CMOS 12-, 10- and 8-bit analog-to-digital converters that operate at 1 MSPS. The ADCS7476/77/78 are drop-in replacements for Analog Devices' AD7476/77/78. Each device is based on a successive approximation register architecture with internal track-and-hold. The serial interface is compatible with several standards, such as SPI™, QSPI™, MICROWIRE™, and many common DSP serial interfaces.
The ADCS7476/77/78 uses the supply voltage as a reference, enabling the devices to operate with a full-scale input range of 0 to VDD. The conversion rate is determined from the serial clock (SCLK) speed. These converters offer a shutdown mode, which can be used to trade throughput for power consumption. The ADCS7476/77/78 is operated with a single supply that can range from +2.7V to +5.25V. Normal power consumption during continuous conversion, using a +3V or +5V supply, is 2 mW or 10 mW respectively. The power down feature, which is enabled by a chip select (CS) pin, reduces the power consumption to under 5 µW using a +5V supply. All three converters are available in a 6-lead, SOT-23 package and in a 6-lead WSON, both of which provide an extremely small footprint for applications where space is a critical consideration. These products are designed for operation over the automotive/extended industrial temperature range of −40°C to +125°C.
- Variable Power Management
- Packaged in 6-Lead, SOT-23 and WSON
- Power Supply used as Reference
- Single +2.7V to +5.25V Supply Operation
- SPI™/QSPI™/MICROWIRE™/DSP Compatible
Key Specifications
- Resolution with no Missing Codes 12/10/8 bits
- Conversion Rate 1 MSPS
- DNL +0.5, -0.3 LSB (typ)
- INL ± 0.4 LSB (typ)
- Power Consumption
- 3V Supply 2 mW (typ)
- 5V Supply 10 mW (typ)
- TPS54350-EP - 具有集成 Fet 的增强型产品 4.5V 至 20V 输入 3A 输出的同步 Pwm 转换开关
- SN74LVC1G38 - 使用漏极开路输出的单路 2 输入与非门
- CD4099B-MIL - CMOS 8 位可寻址锁存器
- TPS23753 - IEEE 802.3-2005 PoE 接口和隔离式转换控制器
- TPD4S1394 - 具有带电插入检测电路的 Firewire ESD 钳位
- LM3485 - 4.5-35V、滞后非同步 PFET 降压控制器
- TPS54615-EP - 增强型产品 3V 至 6V 输入、6A 输出的同步降压 Pwm 转换开关,具有集成 Fet
- TPS2514A - USB 专用充电端口控制器
- SN74LS423 - 双路可重触发单稳多频振荡器
- TPS62400 - 具有 1 线接口、采用 QFN 封装的双路可调节 400mA 和 600mA、2.25MHz 步降转换器



