

- TPS715A33DRBR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LM3S1110-EQC25-A2 - 集成电路(IC) > 嵌入式 > 微控制器
- TPS62065-67EVM-347 - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- TPA741DGNG4 - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- TPA0162PWP - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- LM3S6938-EQC50-A2T - 集成电路(IC) > 嵌入式 > 微控制器
- OPA2137PA - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LP8728QSQX-D/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LP2989AILD-3.6/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN74LVC02ADBR - 集成电路(IC) > 逻辑 > 门和反相器
- TLV9004QPWRQ1 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LMR51450FSQDRRRQ1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- 551600233-001/NOPB - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- LM317LMX - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LP2988AIMMX-5.0 - 电源管理IC - 稳压器 - 线性
- LM3370SDX-3806/NOPB - 电源管理IC - 稳压器 - DC DC 开关稳压器
- LMK5B12212EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- TPA0233DGQ - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- OMAPL138AZCEA3 - 集成电路(IC) > 嵌入式 > 微处理器
- CC2541DK-RC - 开发板,套件,编程器 > 评估板 > 射频评估和开发套件,板



BQ24012 - 采用 QFN/MLP-10 封装的 bqTINY(TM) 线性 1 节 (4.2V) 锂离子充电器,具有 1A FET、AC 存在检测和充电使能端
BQ24012是TI德州仪器公司的一款电池充电器IC产品,BQ24012是采用 QFN/MLP-10 封装的 bqTINY(TM) 线性 1 节 (4.2V) 锂离子充电器,具有 1A FET、AC 存在检测和充电使能端,本站介绍了BQ24012的封装应用图解、特点和优点、功能等,并给出了与BQ24012相关的TI元器件型号供参考。
BQ24012 - 采用 QFN/MLP-10 封装的 bqTINY(TM) 线性 1 节 (4.2V) 锂离子充电器,具有 1A FET、AC 存在检测和充电使能端 - 电池充电器IC - 电池管理产品 - 德州仪器
The bqTINY™ series are highly integrated Li-Ion and Li-Pol linear charge management devices targeted at space limited portable applications. The bqTINY™ series offer integrated powerFET and current sensor, reverse blocking protection, high accuracy current and voltage regulation, charge status, and charge termination, in a small package.
The bqTINY™ charges the battery in three phases: conditioning, constant current, and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety feature for charge termination. The bqTINY™ automatically restarts the charge if the battery voltage falls below an internal threshold. The bqTINY™ automatically enters sleep mode when VCC supply is removed.
In addition to the standard features, different versions of the bqTINY™ offer a multitude of additional features. These include temperature sensing input for detecting hot or cold battery packs; power good (PG) output indicating the presence of valid input power; a TTL-level charge-enable input (CE) used to disable or enable the charge process; and a TTL-level timer and termination enable (TTE) input used to disable or enable the fast-charge timer and charge termination.
- Small 3-mm × 3-mm MLP (QFN) Package
- Ideal for Low-Dropout Designs for Single-Cell Li-Ion or Li-Pol Packs in Space Limited Applications
- Integrated Power FET and Current Sensor for Up to 1-A Charge Applications
- Reverse Leakage Protection Prevents Battery Drainage
- Integrated Current and Voltage Regulation
- ±0.5% Voltage Regulation Accuracy
- Charge Termination by Minimum Current and Time
- Pre-Charge Conditioning With Safety Timer
- Status Outputs for LED or System Interface Indicates Charge and Fault Conditions
- Battery Insertion and Removal Detection
- Works With Regulated and Unregulated Supplies
- Short-Circuit Protection
- Charge Voltage Options: 4.2 V and 4.36 V
- TPS61054 - 具有标准逻辑接口的 700mA 高功率白光 LED 驱动器
- TPA6139A2 - DirectPath? 25mW 耳机放大器
- SN74CBT3257C - 具有 -2V 下冲保护的 4 位 2 选 1 FET 多路复用器/多路解复用器
- BQ24620 - 用于磷酸锂电池的 28V 同步开关模式充电管理 IC
- DRV110 - 具有集成电源调节功能的节能螺线管控制器
- SN54ABT821 - 具有三态输出的 10 位总线接口触发器
- TS3V712E - 7 通道 VGA SPDT 开关
- TPS2069C-2 - 单通道、限流 USB 配电开关
- SN75LBC175 - 四路低功耗差动线路接收器
- ADS1282 - 用于地震监测和能源开发的具有 PGA 的超高分辨率 Σ-Δ ADC



