

- TMDS261PAG - 集成电路(IC) > 线性 > 视频处理
- LMR38020FSDDAR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- TPS61024DRCRG4 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- OPA1678IDGKT - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS62672YFDR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- TPS51285BRUKR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性 + 开关
- TL3472CDR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS7A1601QDGNRQ1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DLPR910AYVA - 集成电路(IC) > 专用 IC
- PT6654E - 直流转换器
- TPS7A1108PDRVR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- MUX36S08IRRJR - 集成电路(IC) > 接口 > 模拟开关,多路复用器,解复用器
- LM95213CISDX - 传感器,变送器 > 温度传感器 > 模拟和数字输出
- SN74LV11AD - 集成电路(IC) > 逻辑 > 门和反相器
- DP83848QSQE/NOPB - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- F280037CSPTG4 - 集成电路(IC) > 嵌入式 > 微控制器
- MSP430F2252IDAR - 集成电路(IC) > 嵌入式 > 微控制器
- LP3875ESX-ADJ/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TLC59116EVM-390 - 开发板,套件,编程器 > 评估板 > LED 驱动器评估板
- SN74AUCH16244DGVR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器



BQ24027 - 具有 USB/AC 电源管理的 1 节锂离子充电 IC,采用 3x3 QFN-10 封装,具有电源良好状态指示、充电启动
BQ24027是TI德州仪器公司的一款电池充电器IC产品,BQ24027是具有 USB/AC 电源管理的 1 节锂离子充电 IC,采用 3x3 QFN-10 封装,具有电源良好状态指示、充电启动,本站介绍了BQ24027的封装应用图解、特点和优点、功能等,并给出了与BQ24027相关的TI元器件型号供参考。
BQ24027 - 具有 USB/AC 电源管理的 1 节锂离子充电 IC,采用 3x3 QFN-10 封装,具有电源良好状态指示、充电启动 - 电池充电器IC - 电池管理产品 - 德州仪器
The bqTINY-II series are highly-integrated, flexible Li-Ion linear charge and system power management devices for space-limited charger applications. In a single monolithic device, the bqTINY-II offers integrated USB-port and ac-adapter supply management with autonomous power-source selection, power-FET and current-sensor interfaces, high-accuracy current and voltage regulation, charge status, and charge termination.
The bqTINY-II automatically selects the USB-port or the ac-adapter as the power source for the system. In the USB configuration, the host can select from two preset charge rates of 100 mA or 500 mA. In the ac-adapter configuration, an external resistor sets the system or charge current.
The bqTINY-II charges the battery in three phases: conditioning, constant current, and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety for charge termination. The bqTINY-II automatically restarts the charge if the battery voltage falls below an internal threshold. The bqTINY-II automatically enters sleep mode when both supplies are removed.
Different versions of the bqTINY-II offer many additional features. These include a temperature-sensor input for detecting hot or cold battery packs, a power-good output (PG) indicating the presence of input power, a TTL-level charge-enable input (CE) used to disable or enable the charge process, and a TTL-level timer and taper-detect enable input (TTE) used to disable or enable the fast-charge timer and charge termination.
- Small 3 mm × 3 mm MLP Package
- Charges and powers Systems from Either AC Adapter or USB With Autonomous power-Source Selection
- Integrated USB Control With Selectable 100 mA and 500 mA Charge Rates
- Ideal for Low-Dropout Charger Designs for Single-Cell Li-Ion or Li-pol Packs in Space Limited portable applications
- Integrated power FET and Current Sensor for Up to 1-A Charge applications From AC Adapter
- Precharge Conditioning With Safety Timer
- power Good (AC Adapter Present) Status Output
- Optional Battery Temperature Monitoring Before and During Charge
- Automatic Sleep Mode for Low-power Consumption
- APPLICATIONS
- PDAs, MP3 Players
- Digital Cameras
- Internet appliances
- Smartphones
bqTINY is a trademark of Texas Instruments.
- SN74ALS992 - 具有三态输出的 9 位 D 类透明读回锁存器
- TPA2038D1 - 可变增益 3.2 W 单声道 D 类,具有集成 DAC 噪声滤波器
- CSD16325Q5 - N 通道 NexFET? 功率 MOSFET
- LM76 - 具有温度比较器和 I2C 接口的 ±1°C 温度传感器
- MSP430FR5968 - Wolverine 混合信号微控制器
- SN74ALS163B - 同步 4 位二进制计数器
- LP2951JAN - Series of Adjustable Micropower Voltage Regulators
- CD54HCT32 - 高速 CMOS 逻辑四路 2 输入或门
- SN74VMEH22501 - 具有三态输出的 8 位通用总线收发器和两个 1 位总线收发器
- CD4071B - CMOS 四路 2 输入或门



