BQ24166 - 电池管理产品

BQ24166是TI德州仪器公司的一款电池充电器IC产品，BQ24166是电池管理产品，本站介绍了BQ24166的封装应用图解、特点和优点、功能等，并给出了与BQ24166相关的TI元器件型号供参考。

BQ24166 - 电池管理产品 - 电池充电器IC - 电池管理产品 - 德州仪器

产品描述

The bq24165, bq24166 and bq24167 are highly integrated single cell Li-Ion battery charger and system power path management devices targeted for space-limited, portable applications with high capacity batteries. The single cell charger has dual inputs which allow operation from either a USB port or higher power input supply (i.e., AC adapter or wireless charging input) for a versatile solution. The two inputs are fully isolated from each other and are managed by the bq24165/166/167 with the IN input having precedence.

The power path management feature allows the bq24165/166/167 to power the system from a high efficiency DC to DC converter while simultaneously and independently charging the battery. The charger monitors the battery current at all times and reduces the charge current when the system load requires current above the input current limit. This allows for proper charge termination and timer operation. The system voltage is regulated to the battery voltage but will not drop below 3.5V. This minimum system voltage support enables the system to run with a defective or absent battery pack and enables instant system turn-on even with a totally discharged battery or no battery. The power-path management architecture also permits the battery to supplement the system current requirements when the adapter cannot deliver the peak system currents. This enables the use of a smaller adapter. The 2.5A input current capability allows for GSM phone calls as soon as the adapter is plugged in regardless of the battery voltage.

The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if the internal temperature threshold is exceeded. Additionally, the bq24166 and bq24167 offer a voltage-based battery pack thermistor monitoring input (TS) that monitors battery temperature for safe charging. The TS function for bq24166 is JEITA compatible.

产品特性

High-Efficiency Switch Mode Charger with Separate Power Path Control
- Make a GSM Call with a Deeply Discharged Battery or No Battery
- Instantly Startup System from a Deeply Discharged Battery or No Battery
Dual Input Charger
- 20V Input Rating, With Over-Voltage Protection (OVP)6.5V for USB Input 10.5V for IN Input
- Integrated FETs for Up to 2.5A Charge RateUp to 2.5A from IN Input Up to 1.5A from USB Input
Highly Integrated Battery N-Channel MOSFET Controller for Power Path Management
Safe and Accurate Battery Management Functions
- 0.5% Battery Regulation Accuracy
- 10% Charge Current Accuracy
Adjustable Charge Current, Input Current Limit, and VINDPM Threshold (for IN input)
Easy JEITA Implementation
- Charge Parameter Selector Inputs (CE1, CE2) for (bq24165)
Voltage-based, NTC Monitoring Input (TS)
- Standard Temperature Range (bq24166)
- JEITA Compatible (bq24167)
Thermal Regulation Protection for Output Current Control
Low Battery Leakage Current, BAT Short-Circuit Protection
Soft-Start Feature to Reduce Inrush Current
Thermal Shutdown and Protection
Available in Small 2.8mm x 2.8mm 49-ball WCSP or 4mm ™ 4mm QFN-24 Packages

下面可能是您感兴趣的TI德州仪器公司电池充电器IC元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购