

- TPS767D325QPWPREP - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LMK61E0-050M00SIAR - 晶体,振荡器,谐振器 > 振荡器
- LM26CIM5-RPA - 传感器,变送器 > 温度传感器 > 温控器 - 固态
- SN74LVC08ABQAR - 集成电路(IC) > 逻辑 > 门和反相器
- UCC28502DWG4 - 集成电路(IC) > 电源管理(PMIC) > PFC(功率因数校正)
- TMDS3080005 - 开发板,套件,编程器 > 开发板,编程器配件
- LP2989AIMM-2.8/NOPB - 电源管理IC - 稳压器 - 线性
- LM25018SDE/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- TMS320F28068MPZT - 集成电路(IC) > 嵌入式 > 微控制器
- SN74HCS367QWBQBRQ1 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- CDC7005QFN-EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- AMC1210IRHAT - 集成电路(IC) > 接口 > 滤波器 - 有源
- ADS1256IDBT - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX211IDB - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LMH6321MR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- DRV8806PWPR - 集成电路(IC) > 电源管理(PMIC) > 电机驱动器,控制器
- LM3444MA/NOPB - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- SN74AHC86DR - 集成电路(IC) > 逻辑 > 门和反相器
- LM317AMDTX - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DDS39RF12ACK - 集成电路(IC) > 接口 > 直接数字合成(DDS)



BQ24201 - 具有温度传感器采用 MSOP-8 封装用于限流应用的 500mA 4.1V 单片锂离子充电器
BQ24201是TI德州仪器公司的一款电池充电器IC产品,BQ24201是具有温度传感器采用 MSOP-8 封装用于限流应用的 500mA 4.1V 单片锂离子充电器,本站介绍了BQ24201的封装应用图解、特点和优点、功能等,并给出了与BQ24201相关的TI元器件型号供参考。
BQ24201 - 具有温度传感器采用 MSOP-8 封装用于限流应用的 500mA 4.1V 单片锂离子充电器 - 电池充电器IC - 电池管理产品 - 德州仪器
The bq2420x series are simple Li-Ion linear charge management devices targeted at low-cost and space limited charger applications. The bq2420x series offer integrated powerFET, high-accuracy voltage regulation, temperature monitoring, charge status, and charge termination, in a single monolithic device.
The bq2420x is designed to work with a current-limited wall-mount transformer and therefore does not provide any current regulation. However, these devices offer a fixed internal current limit to prevent damage to the internal powerFET. A time-limited pre-conditioning phase is provided to condition deeply discharged cells. Once the battery reaches the charge voltage, the high accuracy voltage regulation loop takes over and completes the charge cycle. Charge is terminated based on minimum current. An internal charge timer provides a backup safety for charge termination.
Other standard features include an automatic sleep mode activated when VCC falls below the battery voltage falls below the VRCH threshold.
In addition to the standard features, the core product provides two additional enhancements: temperature monitoring and status display. The temperaturesense circuit continuously measures battery temperature using an external thermistor and inhibits charge until the battery temperature is within the user-defined thresholds. The STAT pin indicates three conditions of operation of the charger. These conditions are charge-in-progress, charge complete, and fault. This output can be used to drive an LED or an interface to a microcontroller.
- Designed Specifically to Work With Current-Limited Wall Supplies
- Ideal for Low Dropout Charger Design for Single-Cell Li-Ion Packs With Coke or Graphite Anodes
- Integrated PowerFET for 500 mA
- Integrated Voltage Regulation With 0.5% Accuracy
- Battery Insertion and Removal Detection
- Charge Termination by Minimum Current and Time
- Pre-Charge Conditioning With Safety Timer
- Sleep Mode for Low-Power Consumption
- Charge Status Output for LED or Host Processor Interface Indicates
- Charge-in-Progress, Charge Completion, and Fault Conditions
- Optional Temperature Monitoring Before and During Charge
- Small, 8-Pin Power-Pad MSOP Package
- CY74FCT574T - 具有三态输出的八路边沿 D 类触发器
- TPS62000-Q1 - 汽车类可调节 600mA 95% 效率步降转换器
- TPS82677 - 600mA、高效 MicroSiP? 降压转换器模块(厚度 <1.0mm)。
- TPS60205 - 具有电源状态良好指示的稳压 3.3V 低纹波充电泵
- TL431-DIE - 精密可编程参考,TL431-DIE
- TMS320F2809 - TMS320F2809, F2808, F2806, F2802, F2801, C2802, C2801, UCD9501 DSP
- MC33063A-Q1 - 汽车类 1.5A 峰值升压/降压/反向开关稳压器
- SN54S86 - 四路 2 输入异或门
- SN75108A - 双路线路接收器
- TPS2834 - 具有 TTL 输入和使能端的同向快速同步降压 MOSFET 驱动器



